This RGB amplifier is designed to allow you to extend your LED strips longer without dimming issues caused by long distant runs.
Assume you want to run a length greater than 5M (16FT), by wiring your RGB strip tothis module, it will be re-energized to prevent dimming on the next set of LED strip.
12V Power supply required or vehicle 12V electrical system
- Total Output Current 12A at 12V DC
- 3 channel RGB Input to 3 channel RGB Output (Common Anode)
- Wires are on both ends, but these can be disconnected if you wish to hardwire.
- Compatible with 5050, 3528 type LED strips with Common Anode V+
- Power consumption when idle is <1W
- Size: 10.5cm x 6.5cm x 2.3cm
- Weight .11KG
