{"product_id":"light-smoke-black-chrome-tail-lights-pair-nissan-pathfinder-2005-2012","title":"Light Smoke Black Chrome Tail Lights Pair for Nissan Pathfinder (2005-2012)","description":"\u003cp\u003eA 2005-2012 Pathfinder looks softer from behind with the factory red lenses, and these light-smoke lamps in a black chrome housing darken that rear by day while a red brake bulb still reads through the tint at night. GENSSI's pair is a vehicle-specific incandescent assembly for the Pathfinder, not a full LED lamp and not an Xterra part, and it uses the factory sockets with no splicing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment Note:\u003c\/strong\u003e Pathfinder only, 2005-2012. It does not fit the Nissan Xterra, and it does not fit the 2013-and-up Pathfinder. The brake socket needs a red 3157. A clear factory brake bulb will not show red through this light-smoke lens.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYEAR\u003c\/th\u003e\n\u003cth\u003eMAKE \/ MODEL\u003c\/th\u003e\n\u003cth\u003eFITS\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2012\u003c\/td\u003e\n\u003ctd\u003eNissan \/ Pathfinder\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2015\u003c\/td\u003e\n\u003ctd\u003eNissan \/ Xterra\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2020\u003c\/td\u003e\n\u003ctd\u003eNissan \/ Pathfinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStyle: Black chrome housing with a light smoke lens; polycarbonate lens with UV protection and high impact resistance. Incandescent bulb lamps, not a full LED assembly\u003c\/li\u003e\n\u003cli\u003eBulbs: Incandescent. Bulbs and sockets are not included. Reuse the factory sockets and install a red 3157 in the brake and park socket, an amber 3156 in the turn socket, and a clear 921 in the reverse socket. Do not put the factory clear brake bulb in this light-smoke lens\u003c\/li\u003e\n\u003cli\u003eSold as: Pair — left and right tail light assemblies\u003c\/li\u003e\n\u003cli\u003eFit: Direct replacement for the 2005-2012 Nissan Pathfinder; plug and play on the factory sockets, no splicing. Does not fit the Xterra\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInterchange\u003c\/h2\u003e\n\u003cp\u003e26555-EA525, 26550-EA525, NI2800172\u003c\/p\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Driver (left) light smoke black chrome tail light assembly\u003c\/li\u003e\n\u003cli\u003e1x Passenger (right) light smoke black chrome tail light assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation — Nissan Pathfinder (2005-2012)\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eOpen the liftgate. On the inner edge of the lamp, in the jamb, remove the two bolts with a 10 mm socket. One bolt is at the top of the lamp and one is at the bottom.\u003c\/li\u003e\n\u003cli\u003ePull the lamp straight rearward. Two locator pins on the outer edge snap into the body. Pull straight back, not up. If a pin is stuck, ease a plastic trim tool between the lamp and the paint. Do not pry the lens.\u003c\/li\u003e\n\u003cli\u003eUnplug the harness connector at the lamp if it is clipped there, then twist each socket counterclockwise and pull it out. The brake and park socket takes a 3157, the turn socket takes a 3156, and the reverse socket takes a 921. Sockets and bulbs are not in the box.\u003c\/li\u003e\n\u003cli\u003eDo not move a clear factory brake bulb into this light-smoke lens. Install a red 3157 in the brake and park socket, an amber 3156 in the turn socket, and a clear 921 in the reverse socket. Lock the sockets clockwise in the new housing.\u003c\/li\u003e\n\u003cli\u003ePlug the harness back on. Line the locator pins up and push the lamp straight on until the pins seat. Start both 10 mm bolts by hand and snug them so the plastic inner edge does not crack.\u003c\/li\u003e\n\u003cli\u003eCheck park, brake, turn, and reverse. The brake lamp should show red through the light-smoke lens. Repeat on the other side.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eBuyer FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a full LED tail light?\u003c\/strong\u003e No. These are incandescent housings with a light-smoke lens and a black chrome housing. You supply a red 3157, an amber 3156, and a clear 921, and you reuse the factory sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the bulbs that are already in the truck?\u003c\/strong\u003e Not the brake bulb. The factory brake bulb is clear, and it will not show red through this smoke lens. Use a red 3157 for brake and park. The turn takes an amber 3156 and reverse takes a clear 921. There is no splicing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit the Xterra or a later Pathfinder?\u003c\/strong\u003e No. It fits the 2005-2012 Pathfinder only, left and right, matching 26555-EA525 and 26550-EA525. The Xterra of those years uses a different lamp, and the 2013-and-up Pathfinder does too.\u003c\/p\u003e","brand":"GENSSI","offers":[{"title":"Default Title","offer_id":68237818658899,"sku":"DS-PATHFINDER-TAIL-LT-SMK-BLK-PAIR-2005-2012","price":148.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/9348\/3859\/files\/hero-pathfinder.jpg?v=1795129582","url":"https:\/\/genssi.com\/es\/products\/light-smoke-black-chrome-tail-lights-pair-nissan-pathfinder-2005-2012","provider":"GENSSI","version":"1.0","type":"link"}