DC 12V input and output 44 Key IR Remote Controller For The LED RGB. IR means point and shoot. Must point at the sensor on the controller to operate.
Works with: 5050 3258 Strip Light and other LED products. To use this product you will need an AC-DC adapter to power it in your home or a 12V power connector that is not included.
44 Key IR Remote Controller
● Connection mode: Common Anode(+)
● Input: 12V
● Output: 12V
● Max load current: 2A each color
● Working Temperature: -20°C-60°C
● Control box dimension: 50mm x34mm x22mm
● Remote controller dimension: 124mm x 56mm x 6mm
● Remote controller battery 3V: 1 x CR2025
FUNCTIONS
| Brightness+ | Brightness- | Pause/Run | ON/OFF |
| Static red | Static Green | Static Blue | Static white |
| Static orange | Static light green | Static Dark blue | Milk white |
| Static Dark yellow | Static Cyan | Static light blue | White pink |
| Static Yellow | Static Light blue | Static Purple | Green-white |
| Static light yellow | Static Sky blue | Static Brown | Blue-white |
| Increase Red | Increase Green | Increase Blue | Speed Up |
| Decrease Red | Decrease Green | Decrease Blue | Speed Down |
| DIY Key 1 | DIY Key 2 | DIY Key 3 | Automatice Change |
| DIY Key 4 | DIY Key 5 | DIY Key 6 | Flash on and off |
| 3 color jump change | 7 color jump change | 3 color Fade change | 7 color Fade change |
