The brightest & most durable 600 LED Dual Layer Motion Chasing Wheel Light Kit! Twice the LEDs as others with Extra features!
4x 15.5” Diameter Rings with two rows of LED
Chasing Function creates amazing moving light patterns
Choose over 250 Patterns and thousands of colors
Bluetooth Controlled - works with an Android / IOS App
Unique Features:
Brake light function – Turns all the lights Red when you brake if wired to your tail light
Turn Signal function – Turns the left side or right side Amber when your turn signals are used if wired to the front or rear turn signal wires
Dual Layer LED provide 2x the light output as others
Waterproof design IP68 for all weather conditions
Vibration and shock proof
Requirements
Wheels must be 17 inch or larger
Your rotors MUST be equal or less than 13 inches 330mm
Inner diameter of the wheel lights rings is 14.5 inches
Outer diameter of the wheel lights are 15.5
Drilling is required, these mount to the dust cover shield behind your rotor
No hardware included, no bolts: We recommend buying the screws, self taps or rivet gun
You can power the bluetooth controller through your park lamp lights, a switch or existing switched 12V power source. We recommend installing the controller inside the vehicle or in engine bay away from excessive heat or water.
Includes: 4x Wheel Lights, RGB Bluetooth Controller, 4 Meter wire length, basic instructions
We recommend you get it professionally installed by a shop. Expect 5 hours of labor, 1 hour on each wheel plus 1 hour for running wires
