{"product_id":"halogen-headlights-pair-for-dodge-caliber-2007-2012","title":"Halogen Headlights Pair for Dodge Caliber (2007-2012)","description":"\u003cdiv style=\"background:#fff3b0;border-left:4px solid #e6b800;padding:10px 14px;margin:0 0 14px;\"\u003e\n\u003cstrong\u003eFitment warning:\u003c\/strong\u003e These headlights fit 2007-2012 Dodge Caliber. That is the full production run of the Caliber; this is the original-style halogen housing used across those years, including after the 2010 facelift. Halogen bulbs are included.\u003c\/div\u003e\n\u003cp\u003eGive a 2007-2012 Caliber a clean factory look again. This original-style halogen pair replaces tired or damaged headlights on the Caliber with clear-lens assemblies and amber reflectors that plug into the factory connectors. Each lamp is DOT and SAE compliant. This is a direct-fit pair — no splicing.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2012\u003c\/td\u003e\n\u003ctd\u003eDodge Caliber\u003c\/td\u003e\n\u003ctd\u003eFull production run. Same original-style halogen housing through the 2010 facelift.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSold as: driver and passenger pair\u003c\/li\u003e\n\u003cli\u003eHousing \/ style: original-style housing, clear lens, amber reflector\u003c\/li\u003e\n\u003cli\u003eLighting: halogen, with bulbs included\u003c\/li\u003e\n\u003cli\u003eDOT and SAE compliant\u003c\/li\u003e\n\u003cli\u003eNew aftermarket assemblies, designed to replace the factory halogen units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDriver-side headlight assembly\u003c\/li\u003e\n\u003cli\u003ePassenger-side headlight assembly\u003c\/li\u003e\n\u003cli\u003eHalogen bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInterchange References\u003c\/h2\u003e\n\u003cp\u003eReplaces the original halogen housings used under 5303739AJ (driver) and 5303738AJ (passenger), and Partslink CH2518118 \/ CH2519118.\u003c\/p\u003e\n\u003ch2\u003eInstallation: Dodge Caliber (2007-2012)\u003c\/h2\u003e\n\u003cp\u003eOn the 2007-2012 Caliber, the front bumper cover comes off so you can reach the three headlight bolts. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eOpen the hood. Remove the T25 bolts along the top of the grille, the 7 mm fasteners in the wheel well and at the fender, the clips under the bumper, and the 10 mm bolts under the bumper. Pull the bumper cover forward and set it aside.\u003c\/li\u003e\n\u003cli\u003eRemove the three 10 mm bolts on each headlight. Pull the assembly forward. Slide the red lock tab on each connector, press the release, and unplug the harnesses. Do not pull on the wiring.\u003c\/li\u003e\n\u003cli\u003eInstall the included halogen bulbs in the new housings. Connect the factory-style connectors and slide the red locks back into place. Seat each assembly and start the three 10 mm bolts. Repeat on the other side.\u003c\/li\u003e\n\u003cli\u003eReinstall the bumper cover, clips, and fasteners, reconnect the battery, and test the headlight and turn signal. Aim the lamps on a level surface before driving at night.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich vehicles do these headlights fit?\u003c\/strong\u003e\u003cbr\u003e\n2007-2012 Dodge Caliber. That is the full production run of the Caliber, and this housing is the original-style halogen lamp used across those years, including after the 2010 facelift. Compare your current lamps with our photos before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these a pair or a single lamp?\u003c\/strong\u003e\u003cbr\u003e\nThis is a complete driver and passenger pair, not a single-side lamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they include bulbs?\u003c\/strong\u003e\u003cbr\u003e\nYes. Halogen bulbs are included for both assemblies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow are they installed on a 2007-2012 Caliber?\u003c\/strong\u003e\u003cbr\u003e\nOn this generation, the front bumper cover comes off first. Remove the T25 bolts along the top of the grille, the 7 mm fasteners in the wheel well and fender, the under-bumper clips, and the 10 mm bolts under the bumper. Each headlight is then held by three 10 mm bolts. Unplug the harnesses (slide the red lock tab first), install the new lamp with the included bulbs, reconnect, reinstall the bumper, and aim the lamps before nighttime driving.\u003c\/p\u003e","brand":"GENSSI","offers":[{"title":"Default Title","offer_id":68128833601619,"sku":"DS-5303739AJ","price":204.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/9348\/3859\/files\/01-main-pair_63ce3c35-6b1e-4427-b55a-161a6b135354.jpg?v=1794442961","url":"https:\/\/genssi.com\/products\/halogen-headlights-pair-for-dodge-caliber-2007-2012","provider":"GENSSI","version":"1.0","type":"link"}