Short answer: the 16.75" 108W LED Light Bar is a compact, two-row bar with bottom-mount brackets. The center LEDs throw a spot beam for distance, and the outer LEDs are flood for width. It's sized to work with our Rock Crawler Bumper, and it also mounts on other bumpers, hoods or anywhere you need a bottom mount. The wiring harness is sold separately.
Specs
- 108W from high-output 3W LEDs
- 16.75" long, with rows about 2.5" tall
- Combo beam: flood on the sides, spot in the center
- IP68 weatherproof, with a 6063 aluminum black body and a PMMA anti-shatter lens
- Works from -40 to 85°C
- Each LED is independent, so if one LED fails the rest keep working
- Part number TB-108W-B
Mounting
The bottom brackets slide, so you can set the spacing to match your mounting holes. Line them up, snug them down, aim the bar, then tighten. Before the first trail run, recheck the bolts after a few miles.
Wiring
A 108W bar needs a relay, a fuse and a switch, not a direct tap into a light circuit. Pick up a harness from LED Light Bar Wiring.
Road use
This is auxiliary off-road lighting. Use it off-road, and turn it off for oncoming traffic. Check your state's rules on covers and use on public roads.
Compare sizes and brackets in Light Bars.
FAQ
Does the 108W light bar come with a wiring harness?
No. The listing says the harness is sold separately. Add a light bar harness with a relay, fuse and switch so the bar has its own fused circuit.
Is it spot or flood?
Both. The center LEDs are a more direct spot beam for distance, and the side LEDs are flood for width. That combo is a good all-around setup for trails.
Where can I mount a bottom-mount bar?
On a front bumper, a hood or anywhere the bar sits on top of a surface. It's sized to work with our Rock Crawler Bumper, and the sliding brackets adjust to your holes.
What happens if one LED goes out?
Each LED is independent, so if one fails the rest keep working. The bar stays usable on the trail until you can contact us or deal with it.
Questions before you order? Call us at 702-988-6800, Mon–Fri 8am–3pm PT. GENSSI has been in business since 2013. Shipping is free to the lower 48, and returns are accepted within 30 days with an RMA.
0 comments