Short answer: the 32ft RGB LED Strip Light Kit is a complete plug-in kit. It comes with 10 meters (32ft) of color-changing strip, a power supply and a remote. It's meant for rooms, shops, TV backlighting and under-cabinet lighting. The strip is not waterproof, so keep it indoors or somewhere it stays dry.
What's in the box
- 1 RGB LED strip, 10m/32ft, with 300 SMD 5050 LEDs (non-waterproof)
- 1 plug-in AC-DC power supply
- 1 44-key IR remote
- 1 user manual
Plan the run before you peel
- Measure where it's going and mark the start, the end and the corners.
- Clean the surface with rubbing alcohol and let it dry. Dust is why strips fall off.
- Do a dry run: plug it in and test it before you stick anything down.
- Peel and press as you go. Don't stretch the strip.
Cutting and reconnecting
You can cut it every 5 LEDs, on the marked line only. Cutting anywhere else kills that section. To bridge a corner or a gap, use strip connectors to join the pieces back together.
The remote
- 20 preset colors
- Modes: quick, slow, auto, flash, 7-color and 3-color fade, and 7-color and 3-color jump
- 6 DIY keys to save your own mix using the R/G/B up and down buttons
It's an IR remote, so point it at the receiver, and don't hide the receiver behind furniture.
Where it doesn't belong
The strip is non-waterproof, so skip outdoor and in-vehicle exterior use. For vehicles, look at LED Whips, Strips & Wheel Lights. More home options are in LED Strips & Accent Lighting.
FAQ
Can I cut the LED strip?
Yes, every 5 LEDs, but only on the marked cut line. Cutting anywhere else leaves that section dead. Use strip connectors to rejoin pieces around corners.
Is the 32ft strip waterproof?
No. This kit is non-waterproof, so use it indoors or in a dry, covered spot. For outdoor or vehicle use, choose a strip that's rated waterproof.
Why doesn't the remote work?
It's an infrared remote, so it needs a clear line of sight to the small receiver on the strip's controller. Move the receiver into the open and check the remote battery.
Can I connect two kits end to end?
The listing doesn't cover joining kits, so we don't recommend it. Running one long chain can overload a single power supply. Give each kit its own power supply.
Questions before you order? Call us at 702-988-6800, Mon–Fri 8am–3pm PT. GENSSI has been in business since 2013. Shipping is free to the lower 48, and returns are accepted within 30 days with an RMA.
0 comments