Smoked Turn Signal and Side Marker Lights for Jeep TJ: What to Know First

Short answer: this smoked signal and side marker kit replaces the amber front bumper turn signals and fender side markers on a 1997–2006 Jeep Wrangler TJ with smoked housings. Amber bulbs are included, so the lights still flash amber. Be ready to reuse your factory screws and bulb sockets. Some TJs need minor adjustments for a flush fit.

What's in the box

• 1 pair of front bumper turn signal lamps (left and right)
• 1 pair of front fender side marker lamps (left and right)
• 4 amber bulbs

Not included: mounting screws and bulb sockets.

Before you start

• Take the factory screws out carefully. If they're rusted or stripped, get replacements before you start.
• Ease the bulb sockets out of the old housings. You'll twist them into the new ones.
• Jeep made small changes over the TJ's production years, so some Jeeps need small tweaks to the mounting points or wiring for a flush fit. If you're not comfortable with that, have a shop do it.

Install

1. Remove the factory lamps and keep the screws and sockets.
2. Put the new amber bulbs into your factory sockets.
3. Twist the sockets into the new smoked housings.
4. Test the parking lights and both turn signals.
5. Mount the housings with the factory screws.

About the smoke finish

The smoke is molded into the lens instead of sprayed on, so it won't peel or flake. The amber bulbs shine through for your signals.

More lighting for the TJ is in Jeep Side Marker & Bumper Lights.

FAQ

Are the TJ smoked lights plug and play?

Not fully. You reuse your factory bulb sockets and screws, and the listing says some TJs need minor tweaks to the mounting points or wiring. Plan for a little fitting time.

Do they still show amber when I signal?

Yes. The kit includes 4 amber bulbs, 2 for the signals and 2 for the markers, so you get amber light through the smoked lens.

Does the smoke wear off?

No. The smoke is molded into the lens material, not a spray tint, so it won't peel, fade to purple or chip off at the car wash.

Will they fit a YJ or JK?

No. This kit is for the 1997–2006 Wrangler TJ only. The YJ and JK have different bumper and fender lights, so check your generation first.

Questions before you order? Call us at 702-988-6800, Mon–Fri 8am–3pm PT. GENSSI has been in business since 2013. Shipping is free to the lower 48, and returns are accepted within 30 days with an RMA.