Short answer: our Locking Hood Latches replace the factory rubber hood latches on the 2007–2017 Jeep Wrangler JK and JKU. Worn rubber latches can let the hood flutter at speed. These are stainless steel and aluminum alloy in black and silver, and they lock with a key. They won't fit the JL.
Fitment
- Jeep Wrangler JK 2-door and JKU 4-door, 2007–2017
- Sport, Sahara, Freedom and Rubicon trims
- Not for the JL
What's in the box
- 2x locking hood latches (left and right)
- Keys
- Mounting hardware and gaskets
How to install
- Open the hood.
- Unbolt the factory rubber latch and its catch on one side.
- Fit the new latch with the supplied gasket and hardware.
- Adjust it so the hood closes snug with no gap.
- Repeat on the other side.
- Test the lock and key, then check the bolts again after a few drives.
FAQ
Will these stop my hood from fluttering?
Hood flutter on the JK is often caused by stretched factory rubber latches. These metal latches hold the hood more firmly. Adjust them so the hood sits snug with no gap.
Do they fit a 2018 Wrangler?
They fit the JK body, built from 2007 to 2017. They will not fit the JL. If you are not sure which body you have, call us before you order.
Do they really lock?
Yes. They are locking latches that come with keys, which makes it harder for someone to open your hood. Keep a spare key somewhere safe, not in the Jeep.
Do I need to drill?
The latches come with mounting hardware and gaskets for the factory latch spots. If anything does not line up on your Jeep, call us before you drill.
Questions before you order? Call us at 702-988-6800, Mon–Fri 8am–3pm PT. GENSSI has been in business since 2013. Shipping is free to the lower 48, and returns are accepted within 30 days with an RMA.
0 comments