Black Projector Halogen Headlights Pair for Hyundai Elantra (2017-2018)

New black-housing halogen projector headlight pair for the 2017-2018 Hyundai Elantra sedan. H7 low beam projector, 9005 high beam. The seller lists bulbs as included.

Fitment

Will NOT fit: Elantra GT, Elantra Sport/Limited with factory HID or LED headlights, or the 2019+ facelift.

Common Reasons to Replace

• Yellowed, hazy, or cracked factory lenses cutting light output
• Moisture or condensation inside the housing
• Broken mounting tabs or collision damage
• Refreshing the front end with a new black look

Specs

• Light type: Halogen projector low beam + reflector high beam
• Housing: Black, clear lens
• Bulbs: Low beam H7, high beam 9005, turn signal PY21W, side marker T10 (bulbs included)
• Lens: Polycarbonate; housing: polypropylene
• DOT & SAE compliant
• Fitment type: Direct replacement, plug-and-play connectors
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 92101-F3000, 92102-F3000 · Partslink: HY2502206, HY2503206

What's Included

• 1 x Driver-side headlight assembly
• 1 x Passenger-side headlight assembly
• Bulbs included: Low beam H7, high beam 9005, turn signal PY21W, side marker T10

Installation (2017-2018 Hyundai Elantra)

Tools: 10 mm and 12 mm sockets, Phillips screwdriver, clip tool.

1. Disconnect the negative battery cable.
2. Remove the upper radiator cover clips.
3. Remove the front bumper cover: top screws/clips, wheel-well fasteners, and lower screws. Unplug the fog lights and set the cover aside.
4. Remove the headlight mounting bolts and pull the lamp forward.
5. Unplug the connector and move the bulbs.
6. Install, reconnect, test, refit the bumper and aim the beams.

Steps based on the Hyundai Elantra (AD) 2017-2018 shop manual headlamp procedure.

FAQ

Will these fit a 2019 Elantra?
No. The 2019-2020 facelift has a different, angular headlight. This pair is for 2017-2018.

Will these fit my Elantra GT?
No. The Elantra GT hatchback uses different headlights.

What bulb sizes do these use?
Low beam H7, high beam 9005, turn signal PY21W, side marker T10 (bulbs included).

Can I put LED bulbs in these?
Yes. These are halogen housings, so H7/9005 LED conversion kits fit. Use a quality kit with a CANbus decoder if you see flicker or a bulb-out warning, and re-aim the beams after install.