Chrome Halogen Headlights Pair w/ Bulbs for Ford Transit Connect (2019-2023)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed or cracked headlights on your 2019-2023 Ford Transit Connect with this brand-new chrome halogen pair, bulbs included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2019-2023 | Ford Transit Connect XL / XLT / Titanium (factory halogen) | Factory halogen headlights |
Will NOT fit: Transit Connect with factory HID/Xenon; 2014-2018 Transit Connect.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Type: halogen reflector
- Bulbs: included (match factory sizes when replacing)
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: KT1Z13008A, KT1Z13008B. Partslink: FO2502386, FO2503386.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Bulbs included per listing
Installation
- Open the hood and remove the upper grille screws, then turn the wheels and remove the two 7 mm bolts on the bumper-cover edge in each front wheel well.
- Remove the lower bumper fasteners, carefully pull the bumper-cover edges away (hidden clips) and slide the cover forward enough to clear the lamps.
- Remove the three 10 mm headlamp bolts (two on top, one behind the bumper bracket), pull the lamp forward and unplug the harness and bulb sockets.
- Install the new lamp, snug the three bolts, refit the bumper cover and aim the headlights.
Steps compiled from AutoSaver88 Transit Connect headlamp install guide and Ford Transit Connect owner manual "Removing a Headlamp Assembly". Professional installation and headlight aiming are recommended.
FAQs
Will these fit a 2018 Transit Connect?
No. The 2019 refresh uses different headlights.
Do these fit HID-equipped vans?
No. Factory halogen models only.
Do I need to remove the front bumper to replace these headlights?
Yes, partially. The bumper-cover edges must be pulled forward to reach the lower 10 mm headlamp bolt.
Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.