5.75 (5 3/4) In LED Black Projector Headlight Round DOT V2 Set
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Eliminate the parasitic power draw and dangerous output of vintage sealed beams with a modern projector conversion.
Direct-Fit GENSSI 5.75-Inch Projector LED V2 Conversion (Pair)
Factory sealed beam headlights rely on incandescent filaments that degrade over time and fracture under vibration. This outdated technology creates a scattered, yellow beam pattern that fails to illuminate road hazards effectively.
The GENSSI V2 replaces the entire H5001/H5006 sealed unit with a solid-state LED assembly. Utilizing a dedicated projector lens, it focuses 2800 lumens strictly on the road surface, establishing a sharp cutoff line that prevents blinding oncoming traffic.
Why You Need This Upgrade
- Optical Precision: Projector optics control the 3780LM high beam for maximum down-road throw without light scatter.
- Thermal Management: Die-cast aluminum housing dissipates heat actively, preventing the LED junction failure common in plastic housings.
- Vibration Resistance: Solid-state CREE XML-10W diodes eliminate brittle filaments, making this unit impervious to stiff suspensions or V-Twin vibration.
- Impact Durability: The polycarbonate lens withstands stone chips and road debris that typically shatter glass sealed beams.
- Electrical Stability: Operating range of 9V-32V DC ensures consistent output regardless of alternator fluctuation or voltage drop.
| Fitment Standard | 5.75" Round Sealed Beam Buckets |
| Light Source | 8x CREE XML-10W (80W Total) |
| Lumen Output | 2800LM (Low) / 3780LM (High) |
| Compliance | DOT Approved / SAE Standards |
Interchange & OEM Part Numbers
HD# 67698-81B, H5001, 4000, 4040, 5506, H5006, H5006LL, H5009, 30601-1, MCP461SLV1, Res. #8034853, USA DOT 18511, 6240002149073, Type 2C1, 30847-8, 308478, 13922, 0 00 43168 13922 9, Wagner 5731, G4, BSAU40
Stop settling for dim halogen output and upgrade your lighting system with GENSSI today.
Installation
- Park on level ground, turn the engine off, and disconnect the negative battery cable.
- Remove the headlight bezel or trim ring screws to reach the existing sealed-beam headlight.
- Remove the retaining ring, pull the old headlight forward, and unplug it from the harness.
- Plug the new headlight into the factory connector and test high/low beam before final mounting.
- Set the new headlight in the bucket, reinstall the retaining ring and bezel.
- Reconnect the battery, check all functions, and aim the headlights before night driving.
These are direct-replacement sealed-beam style lights for the listed sizes. Some vehicles may need anti-flicker or CANbus decoders. Professional installation is recommended if you are unsure.
Buyer FAQ
Does this fit the vehicles named in the title?
Fitment follows the product title and listing. Confirm your application on this page before ordering.
Is this sold as a pair?
Check What's included on this page for pack quantity and sides.
Are OEM interchange numbers listed?
Yes. Interchange/OEM refs on this page include 67698-81B, H5001, H5006.