5.75 (5 3/4) Inch LED Black Projector Motorcycle Headlight Round
$63.95
Skip to product information
5.75 (5 3/4) Inch LED Black Projector Motorcycle Headlight Round
$63.95
5HDLT-BLK
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Illuminate Your Ride with Crystal-Clear Vision and Bold Style
Upgrade your motorcycle’s presence and performance with a headlight that cuts through the darkness. Experience unparalleled clarity on every journey, from city streets to winding country roads, while adding a sleek, modern aesthetic to your bike. This isn’t just a headlight; it’s a statement of safety and sophistication.
Why You Need This
- Superior Illumination: Powerful 40W high beam and 20W low beam deliver exceptional light output (1770lm/1350lm) for enhanced visibility.
- Enhanced Clarity: A crisp 6000K color temperature improves your ability to see road markings and hazards, especially in low-light conditions.
- Built to Last: Featuring a durable polycarbonate lens, IP68 water and dust resistance, and voltage management from 10V to 30V DC, this headlight is designed for longevity.
- Seamless Integration: Includes an H4 to H13 adapter for wider compatibility, and meets DOT/SAE standards for compliance and safety.
Technical Specifications
| Part Numbers | HD# 67698-81B, H5001, 4000, 4040, 5506, H5006, H5006LL, H5009 |
|---|---|
| Fitment | Standard 5.75" (5 3/4") round motorcycle headlamp housings. Some models may require slight modification. Compatible with H4 or H13 plugs (adapter included). Applicable to motorcycles, off-road, and vehicles with 9V to 32V DC operation. |
| Specs |
|
At GENSSI, we’re committed to providing top-tier automotive lighting solutions. Our products are rigorously tested to ensure they meet the highest standards of performance and durability. Ride with confidence, knowing you’re backed by the GENSSI Promise of quality and innovation.
Installation
- Park the bike on a stand, turn the ignition off, and disconnect the negative battery cable if your service manual calls for it.
- Remove the headlight trim ring or bucket screws and pull the old headlight out of the bucket.
- Unplug the headlight connector from the harness.
- Plug the new LED headlight into the harness (use an adapter if your bike needs one) and test high/low beam before final assembly.
- Seat the new headlight in the bucket and reinstall the trim ring and screws.
- Reconnect the battery, check all functions, then aim the headlight so the beam does not blind oncoming traffic.
Some bikes may need a load resistor or anti-flicker adapter; check your model before install. Professional installation is recommended if you are unsure.