991-style projector headlight pair for a Litronic Porsche 996

991 Style Projector Headlights for Porsche 911 996 Xenon (2002-2004)

$2,869.95
Skip to product information
991-style projector headlight pair for a Litronic Porsche 996

991 Style Projector Headlights for Porsche 911 996 Xenon (2002-2004)

$2,869.95
DS-996-HEAD-991-HALO-XENON-2002-2004

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

A 996.2 with Litronic loses the plain factory lens and picks up a 991-style projector with a white ring. GENSSI supplies the pair for the 2002-2004 Carrera, Carrera 4, Carrera 4S, and Targa.

Important Fitment Note: Factory Litronic only. A halogen 996 uses a different lamp and a different release of the beam. The D2S bulb, ballast, and ignitor move out of the original housing. The 1999-2001 996.1 lamp does not interchange.

Fitment

YEAR MAKE / MODEL FITS
2002-2004 Porsche 911 Carrera, Carrera 4, Carrera 4S, and Targa with Litronic Yes
1999-2001 Porsche 911 996.1 No
2002-2004 Porsche 911 996 with halogen headlights No

Specs

  • Style: Black housing, clear lens, projector low beam, and a white LED ring
  • Bulbs: D2S low beam and the ballast transfer from the car. One H7 high beam per side is in the box. The signal and the inner lamp are LED
  • Sold as: Pair of headlights. D2S bulbs, ballasts, and ignitors transfer from the factory Litronic lamps
  • Fit: 2002-2004 911 Carrera, Carrera 4, Carrera 4S, and Targa with factory Litronic xenon. Not 1999-2001. Not a halogen car

Interchange

99663105921, 99663106021

What's included

  • 1x Driver headlight
  • 1x Passenger headlight
  • 2x H7 high-beam bulbs

Installation — 2002-2004 Porsche 911 996 Litronic

  1. Open the front trunk and pull the side carpet back. Pull the round rubber plug in the inner fender. That hole is the headlight latch, not the beam-aim adjuster beside it.
  2. Put a 5 mm socket in the latch so the handle points rearward, then turn it 180 degrees toward the front of the car. The lamp cams forward and the harness unplugs as it comes out.
  3. On the bench, move the D2S bulb, ignitor, and ballast into the new housing. Do not touch the D2S glass. Fit the included H7 in the high-beam socket.
  4. Line up the three round tabs on the back of the lamp with the channels in the carrier, then push the housing in until it sits flush.
  5. Turn the 5 mm socket back toward the rear until the latch pops locked. Refit the rubber plug and the carpet, then aim the beams.

Buyer FAQ

Does a halogen 996 use this pair? No. This pair replaces the Litronic housing, 99663105921 and 99663106021. A halogen car has a different lamp.

Are the xenon parts in the box? The H7 high-beam bulbs are. The D2S bulbs, ballasts, and ignitors come out of the original headlights.

Does a 1999-2001 996.1 fit? No. The 996.1 headlight is a different housing. This pair is the 2002-2004 car.

You may also like