All Clear LED Tail Lights Pair w/ Conversion Harness for Ford F-150 Halogen Models (2015-2017)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Factory halogen F-150 tails look dull at night—these all-clear full LED lamps put a bright red LED loop behind a crystal clear lens on 2015-2017 trucks. GENSSI's F-150 kit is a vehicle-specific tail light pair with halogen-to-LED conversion harnesses included for plug-and-play factory connection.
Important Fitment Note: Fits 2015-2017 F-150 with factory halogen (incandescent) tail lights only—including Raptor, XL, XLT, SSV, Lariat, Platinum, and King Ranch. Not for trucks with factory LED tail lights and not for 2018-2020 F-150.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2015-2017 | Ford / F-150 with factory halogen tail lights (XL, XLT, SSV, Lariat, Platinum, King Ranch, Raptor) | Yes |
Specs
- Style: Chrome housing, all-clear lens, full LED
- Bulbs: Built-in full LED — no bulbs required. Halogen-to-LED conversion harnesses included
- Sold as: All-clear full LED tail light pair with halogen-to-LED conversion harnesses
- Fit: Direct-fit all-clear full LED tails for 2015-2017 Ford F-150 with factory halogen (incandescent) tail lights
Interchange
FL3Z-13405-A, FL3Z-13405-B, FL3Z-13405-E, FL3Z-13405-F, HL3Z-13405-D, FL3Z-13404-A, FL3Z-13404-B, FL3Z-13404-E, FL3Z-13404-F, HL3Z-13404-D
What's included
- 1x Driver all-clear full LED tail light
- 1x Passenger all-clear full LED tail light
- x2 halogen-to-LED wire adapters (driver + passenger)
- x2 cover caps with screws for the blind spot sensor opening
Installation — Ford F-150 (2015-2017)
- Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
- Open the tailgate and remove the two 8 mm bolts on the inner edge of each tail light.
- Pull the lamp straight rearward off its retaining studs; it is tight, so keep the pull straight and use a trim tool if needed. Press the retaining tab on each connector and disconnect the factory plugs.
- Connect the included halogen-to-LED wire adapter between the truck connectors and the new lamp. Install the included cover cap with its screws over the sensor opening on the back of the lamp.
- Seat the lamp on the body studs and refit the two 8 mm bolts.
- Reconnect the battery and test parking, brake, turn, and reverse on both sides.
Buyer FAQ
Will these fit my truck with factory LED tail lights? No. This kit is for 2015-2017 F-150 trucks with factory halogen (incandescent) tail lights only. The included harness converts the halogen plug to the LED lamp.
Is this a bulb kit or a full tail light? A full replacement assembly with built-in LEDs, an all-clear lens, and the conversion harness. No bulbs to buy.
What are the cover caps for? The back of each lamp has an opening for a blind spot sensor. The included caps and screws seal that opening so water stays out.