GENSSI hero — all clear lens tail lights pair with bulbs Cadillac Escalade (2002-2006) white background

All Clear Lens Tail Lights Pair w/ Bulbs for Cadillac Escalade (2002-2006)

$279.95
Skip to product information
GENSSI hero — all clear lens tail lights pair with bulbs Cadillac Escalade (2002-2006) white background

All Clear Lens Tail Lights Pair w/ Bulbs for Cadillac Escalade (2002-2006)

$279.95
DS-ESCALADE-TAIL-ALL-CLR-PAIR-2002-2006

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

The stock red lenses on a second-gen Escalade look dated—this all-clear pair gives the truck a clean, bright rear end that still lights red for brake and parking through the included bulbs. GENSSI's Escalade pair is a vehicle-specific replacement that plugs into the factory harness with no rewiring and ships with bulbs in the box.

Important Fitment Note: Fits the 2002-2006 Cadillac Escalade SUV (second generation). The 2007-2014 Escalade uses a different tail light and is not compatible.

Fitment

YEAR MAKE / MODEL FITS
2002-2006 Cadillac / Escalade SUV, all models Yes
2007-2014 Cadillac / Escalade No

Specs

  • Style: Black trim housing, all-clear lens — brighter, whiter rear end; polycarbonate lens with UV and impact protection
  • Bulbs: Incandescent, bulbs included — x4 3157 red, x2 194 red, x2 3157 clear. Reuse factory sockets
  • Sold as: All-clear tail light pair (left + right) with bulbs
  • Fit: Direct-fit all-clear tails for 2002-2006 Cadillac Escalade SUV, all models

Interchange

15044523, 15079079

What's included

  • 1x Driver all-clear tail light
  • 1x Passenger all-clear tail light
  • x4 3157 red bulbs
  • x2 194 red bulbs
  • x2 3157 clear bulbs

Installation — Cadillac Escalade (2002-2006)

  1. Turn the headlamp switch off and open the liftgate. This is one housing per side. The 2007-2014 Escalade uses a different lamp and a connector reached under the bumper.
  2. Each 2002-2006 lamp is held by two screws at the lamp edge, visible once the liftgate is open. Remove those two screws.
  3. Pull the housing off the quarter. Twist each socket a quarter turn counterclockwise. The top socket is park and stop, the center socket is the turn signal, and the lower socket is backup.
  4. Move the sockets into the new housing and lock each one with a quarter turn clockwise. Set the housing on the body and install the two screws. Tighten them to 1.6 N·m (14 lb-in). Do not crank them down.
  5. Close the liftgate and check park, brake, turn, and reverse on both sides.

Buyer FAQ

Will the lights still look red when I brake? Yes. The lens is clear, and the red bulbs supply the brake and parking color, so the lamps light up red with a bright, modern clear look when off.

Do I need to splice or re-wire anything? No. The lamps are built for plug-and-play fitment with the factory harness, with no rewiring. Sockets are not included, so move your factory sockets over.

Which Escalades fit, and what is in the box? The 2002-2006 Escalade SUV, all models. You get the driver and passenger tail lights plus eight bulbs (4x 3157 red, 2x 194 red, 2x 3157 clear), matching OEM 15044523 on the left and 15079079 on the right.

You may also like