GENSSI hero — all clear tail lights pair for Ford Ranger (1993-1997) on white

All Clear Tail Lights Pair for Ford Ranger (1993-1997)

$116.95
Skip to product information
GENSSI hero — all clear tail lights pair for Ford Ranger (1993-1997) on white

All Clear Tail Lights Pair for Ford Ranger (1993-1997)

$116.95
DS-RANGER-TAIL-CLR-PAIR-1993-1997

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

A hazy red lens leaves a 1990s Ranger looking dated from behind, and this clear pair turns that lamp into a bright chrome-and-clear face while the red brake bulb and amber turn bulb keep each signal readable at night. GENSSI's set is a left and right assembly for the 1993-1997 Ranger, not a lens cover and not the 1998 lamp, and the factory sockets twist in with no splicing.

Important Fitment Note: 1993-1997 Ranger only. The 1998-2011 Ranger uses a different tail lamp. On this clear lens, the brake bulb has to be red and the turn bulb has to be amber.

Fitment

YEAR MAKE / MODEL FITS
1993-1997 Ford / Ranger, all trims Yes
1998-2011 Ford / Ranger No

Specs

  • Style: Chrome housing with a clear lens
  • Bulbs: Incandescent. Two red bulbs and two amber bulbs are included. Brake uses a red 3157. Turn uses an amber 3157. Reverse is a 3156 and is not in the box. Sockets are not included
  • Sold as: Pair — left and right clear tail lights, with two red and two amber 3157 bulbs
  • Fit: Direct replacement for every 1993-1997 Ford Ranger, including XL, XLT, STX, and Splash. Factory sockets, no splicing

Interchange

F37Z-13405-A, F37Z-13404-A, FO2800110, FO2801110

What's included

  • 1x Driver (left) clear lens tail light
  • 1x Passenger (right) clear lens tail light
  • 2x red 3157 bulbs
  • 2x amber 3157 bulbs

Installation — Ford Ranger (1993-1997)

  1. Lower the tailgate. The only tool is a Phillips screwdriver.
  2. Remove the two longer Phillips screws on the outboard face of the lamp, then the two shorter Phillips screws on the inner edge beside the tailgate.
  3. Pull the housing straight back off its locating pins. Support it. Do not hang it from the wires.
  4. Twist the three sockets a quarter turn counterclockwise. One is brake and park, one is the turn signal, and one is reverse. The sockets are not in the box.
  5. Put a red 3157 in the brake socket and an amber 3157 in the turn socket. Move the factory 3156 into the reverse socket.
  6. Lock the sockets into the new housing. Seat the pins, start the inner screws, then the outer screws. Snug them. Do not overtighten or the lens can crack.
  7. Check park, brake, both turn signals, and reverse before you raise the tailgate. Repeat on the other side.

Buyer FAQ

Is this the red smoke Ranger pair? No. These are clear lenses in chrome housings. The brake color comes from the red bulb, and the turn color comes from the amber bulb.

Do I have to splice wires? No. The factory sockets twist into the new housings. Reverse bulbs are not in the box.

Which Rangers fit? Every 1993-1997 Ranger, including Splash, XL, XLT, and STX. Left replaces F37Z-13405-A. Right replaces F37Z-13404-A. A 1998-2011 Ranger uses a different lamp.

You may also like