Black 7x6 LED Dual Projector Headlights Pair
$109.95
Skip to product information
Black 7x6 LED Dual Projector Headlights Pair
$109.95
DS-H6054-LED-DYSF7
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These replace 7x6 / 5x7 inch rectangular sealed-beam headlights (H6054, H5054, H6054LL, 6052, 6053, 69822) that use an H4 (9003) plug. Check that your vehicle has 7x6 / 5x7 sealed beams before ordering. Each lamp is a complete LED headlight with the LEDs built in, so no separate bulbs are needed. Two H4 (9003) harness adapters are included.
New black 7x6 (5x7) LED dual-projector headlights, sold as a pair. These are a universal replacement for standard 7x6 / 5x7 rectangular sealed-beam headlights, with high and low beam in each lamp and a pair of H4 (9003) harness adapters in the box.
Specs
- Condition: New
- Sold as: Pair (2 headlights)
- Size: 7x6 inch / 5x7 inch rectangular (190 mm W x 141 mm H x 98.2 mm D)
- Lighting: LED, high and low beam, dual projector lenses
- Housing: Black die-cast aluminum with finned heat sink and breather valve
- Lens: Clear
- Color temperature: 6000K–6500K white
- Connector: H4 (9003); two harness adapters included
- Operating voltage: 10–30V DC
- Water resistance: IP67
- Lens marking: DOT SAE VOR HL 22 12V
- Warranty: 5 year
In the Box
- 2 x 7x6 / 5x7 LED headlights
- 2 x H4 (9003) harness adapters
Interchange References
H6054, H5054, H6054LL, 69822, 6052, 6053
Installation: 7x6 / 5x7 Sealed-Beam Replacement
- Remove the headlight bezel or trim ring around the old sealed beam (usually held by a few screws).
- Remove the screws on the inner retaining ring while supporting the old sealed beam so it does not drop. Do not turn the separate aiming screws on the headlight bucket.
- Pull the old sealed beam forward and unplug the factory connector.
- Connect the LED headlight to the factory plug with the included H4 (9003) harness adapter. Switch on the low and high beams to confirm both work before reassembly.
- Seat the LED headlight flush in the bucket, refit the retaining ring and screws, then repeat on the other side.
- Check aim against a wall before driving, then refit the bezels.
Frequently Asked Questions
What size are these?
They replace 7x6 / 5x7 inch rectangular sealed-beam headlights, including H6054, H5054, H6054LL, 6052, 6053 and 69822. Confirm that size on your vehicle before ordering.
Do I need bulbs?
No. The LED light sources are built into each headlight. Two H4 (9003) harness adapters are included.
What connector do they use?
H4 (9003). Use the included adapters to connect to the factory plug.
Are they DOT/SAE marked?
Yes. Each lens is marked DOT SAE VOR HL 22 12V.
How hard is installation?
It is a bezel, retaining ring and connector swap with the included adapters and hand tools. Aim the lights after installation.