Black Bezel Halogen Headlights Pair for Ford F-250 F-350 Super Duty (2020-2022)

Replace hazy or damaged headlights on your 2020-2022 Ford F-250/F-350 Super Duty with this new gloss-black bezel halogen pair. H13 low/high bulbs included per the listing.

Fitment

Will NOT fit: Super Duty with factory LED headlights; 2017-2019 and 2023+ Super Duty.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam: H13 (per listing), included
• Bezel: Gloss black
• Type: halogen reflector
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: LC3Z13008B, LC3Z13008A. Partslink: FO2502405, F2503405.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights
• H13 bulbs (per listing)

Installation

1. Remove the 14 push clips and lift off the radiator/grille cover.
2. Remove the six 10 mm bolts along the top of the grille, pry off the side trim pieces and remove the 10 mm bolts behind them; pull the grille forward, release the 4 lower clips and unplug the camera and washer if equipped.
3. If needed, loosen the bumper bolts to lower it slightly and remove the 13 mm bolt under the headlight.
4. Remove the two 10 mm bolts on top of the headlight, lift it up and over the rubber piece at its base, pull forward and unplug.
5. Install the new lamps, test every function, refit the grille and cover and aim.

Steps compiled from the Morimoto 2020-22 Super Duty headlight install guide (PDF), the Morimoto blog 2020+ Super Duty install and the Lightwerkz 2020-22 Super Duty halogen fitment notes. Professional installation and headlight aiming are recommended.

FAQs

Will these fit a truck with factory LED headlights?
No. Halogen models only, per the listing.

What bulbs do these use?
H13 low/high beam, per the listing, included.

Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward. The listing-backed size is H13.

Do I need to remove the front bumper to replace these headlights?
The grille comes off; on some trucks the bumper is lowered slightly to reach the 13 mm bolt under the lamp.