Black Bezel Halogen Headlights Pair w/ Bulbs & Chrome Reflectors for Ford Fiesta (2014-2019)

Replace yellowed, cracked or hazy headlights on your 2014-2019 Ford Fiesta with this brand-new pair of black-bezel halogen headlights with bright chrome reflectors, bulbs included.

Fitment

Will NOT fit: Fiesta ST unless your lamp matches; halogen chrome-bezel lamps; 2011-2013 Fiesta.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Bezel: Black
• Reflector: Chrome
• Type: Halogen with projector low beam
• Bulbs: included (sizes not stated in listing)
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: D2BZ13008J, D2BZ-13008-L, d2bz13008d, D2BZ13008H, d2bz13008b, d2bz13008f. Partslink: FO2503324, FO2502324.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Bulbs included

Installation

1. Disconnect the battery. Pop out the retainer clip on the upper bumper next to the headlight.
2. Remove the three T30 Torx screws: two at the front of the lamp and one at the upper rear.
3. Lift the rear tab of the lamp out of its fender clip, then work the front lip of the lamp out from under the bumper.
4. Unplug the connectors and move over the harness retainer clips.
5. Seat the lower mounting tab in its white clip, slide the front lip under the bumper, press the lamp down until it clicks, refit the screws (5 Nm) and the push pin, then aim.

Steps compiled from 1A Auto 2011-2019 Fiesta headlight video and the Ford Fiesta workshop manual (headlamp assembly). Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these headlights use?
The listing images do not state the bulb sizes. Bulbs are included; match your factory bulb sizes if you ever replace them.

Will these fit a Fiesta with the chrome bezel?
No. Per the listing match photo, these fit the halogen black-bezel lamp; the halogen chrome-bezel version does not match.

Do I need to remove the front bumper to replace these headlights?
No. On the 2014-2019 Fiesta the lamp comes out from above: remove the upper bumper clip and three T30 screws, release the rear tab and slide the lamp out from under the bumper.

Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.