Black Bezel Halogen Headlights Pair w/o LED DRL for Ford Focus (2015-2018)
$160.95
Skip to product information
Black Bezel Halogen Headlights Pair w/o LED DRL for Ford Focus (2015-2018)
$160.95
DS-F1EZ13008F
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed or cracked headlights on your 2015-2018 Ford Focus with factory halogen headlights without LED DRL with this brand-new pair of black-bezel halogen headlights.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2015-2018 | Ford Focus sedan/hatchback (halogen, without LED DRL) | Factory halogen headlights |
Will NOT fit: Focus with LED DRL; HID Focus; Focus ST/RS unless your lamp matches; 2012-2014 Focus.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Bezel: Black
- Type: halogen
- LED DRL: none
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: F1EZ13008F. Partslink: FO2502337, FO2503337.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Headlight assemblies (pair)
Installation
- Disconnect the battery and open the hood.
- Remove the T30 Torx bolts holding the headlamp (one at the grille side and one at the fender side). If needed, remove the wheel-arch screws and loosen the bumper corner for clearance.
- Pull the lamp forward and unplug the connector.
- Fit the new lamp, refit the T30 bolts and any bumper fasteners, and aim the headlights.
Steps compiled from Scegliauto Ford Focus Mk3 headlight video and carsparefinder Mk3 Focus headlamp guide. Professional installation and headlight aiming are recommended.
FAQs
What bulbs do these headlights use?
The listing images do not state the bulb sizes; match your factory bulbs.
Will these fit a Focus with LED DRL?
No. Per the listing match photo, these fit cars without the LED DRL; LED DRL lamps do not match.
Do I need to remove the front bumper to replace these headlights?
Usually no. On the 2015-2018 Focus each headlamp is held by two T30 Torx bolts; if access is tight, loosen the bumper corner (clips, wheel-arch screws, T30 bumper-to-fender bolt) and pull it slightly forward.
Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.