Black D2S Projector Headlights for BMW E39 Xenon (1997-2000)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
A xenon E39 keeps its factory D2S beam and picks up the black projector face with a halo. GENSSI supplies the housings for the 1997-2000 sedan and wagon, and the ballast and bulb come off the old lamps.
Important Fitment Note: These fit a 1997-2000 E39 sedan or wagon that left the factory with xenon headlights. They do not fit a halogen car, and they do not fit a 2001-2003 lamp opening. The factory ballast, ignitor, D2S bulb, and leveling motor move over. The angel-eye lead has to be tapped into the parking-light wire.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 1997-2000 | BMW 5 Series E39 sedan, factory xenon headlights | Yes |
| 1997-2000 | BMW 5 Series E39 wagon, factory xenon headlights | Yes |
| 1997-2000 | BMW 5 Series E39 with factory halogen headlights | No |
| 2001-2003 | BMW 5 Series E39 | No |
Specs
- Style: Black housing with a D2S low-beam projector and angel-eye rings
- Bulbs: D2S low beam, H7 high beam, and 3157 turn. None are in the box. The factory ballast, ignitor, and leveling motor transfer
- Sold as: Pair for factory xenon 1997-2000 cars. Ballast, ignitor, D2S bulb, and leveling motor transfer
- Fit: 1997-2000 E39 sedan and wagon with factory xenon headlights. Not halogen. Not 2001-2003
Interchange
63128386559, 63128386560
What's included
- 1x Driver headlight
- 1x Passenger headlight
Installation — 1997-2000 BMW 5 Series E39
- Note where the low beams hit a wall so the aim can be matched after the swap.
- Unplug the low-beam connector at the ballast, the high-beam connector, the turn and parking connector, and the leveling-motor connector.
- Remove the four 8mm screws. The upper screws use serrated washers and the lower screws use flat washers.
- Pivot the inner edge outward, clear the outer lug, and slide the lamp forward.
- Move the D2S bulb, ballast, ignitor, and leveling motor into the new lamp. Tap the angel-eye lead into the parking-light wire. Move the H7 high beam over too.
- Swing the lamp in, start the four screws in the same washer positions, and aim the beams.
Buyer FAQ
Will these fit a halogen E39? No. A halogen car needs the H7 pair. This housing is the D2S xenon shell.
Is the ballast in the box? No. The factory ballast, ignitor, D2S bulb, and leveling motor come off the old lamps.
Do they fit a 2002 E39? No. The 2001-2003 opening is the facelift lamp. This pair is the 1997-2000 housing.