Black Full LED Headlights Pair with DRL for Kenworth T680 (2013-2021)
$808.95
Skip to product information
Black Full LED Headlights Pair with DRL for Kenworth T680 (2013-2021)
$808.95
DS-P54610310000-LED
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit Kenworth T680 trucks (2013-2021) that use this aero headlight housing. They will not fit the redesigned 2022-up Next Gen T680. They also will not fit T880 or other Kenworth models. Compare your current lamps with our photos before ordering.
Upgrade the front of your 2013-2021 Kenworth T680 with this black full-LED pair. Each lamp has built-in LED high and low beam, a C-shaped LED DRL, and amber corners, and it mounts in the factory aero headlight opening. Sold as a driver and passenger pair.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2013-2021 | Kenworth T680 | Aero housing; not the 2022-up Next Gen refresh |
Specs
- Condition: New
- Sold as: Driver and passenger pair
- Lighting: Full LED high and low beam, with a C-shaped LED DRL and amber corners
- Housing: Black, clear lens
- Operating voltage: 12V
- Certification: DOT-certified
- Warranty: 1 year
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
P54-6103-10000, P54610310000, P54610310000R
Installation: Kenworth T680 (2013-2021)
On a 2013-2021 T680 the headlight is reached from the engine bay with the hood open. You usually do not need to remove the bumper. Professional installation and beam aiming are recommended.
- Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Tilt the hood open and support it. From the engine bay, unplug the harness at the back of the old assembly.
- Remove the mounting bolts that hold the lamp to the front header. Support the assembly as you take out the last bolt, then slide it forward off the alignment pins.
- Set the new assembly on the same pins, start the bolts by hand, and snug them evenly. Do not overtighten the housing ears. Reconnect the factory harness until it clicks.
- Repeat on the other side, reconnect the battery, and test every lighting function. Aim the lamps on level ground before driving at night.
Frequently Asked Questions
Which trucks do these headlights fit?
Kenworth T680 trucks from 2013 through 2021 with this aero headlight housing. Compare your current lamps with our photos before ordering.
Will they fit a 2022 or newer T680?
No. The redesigned 2022-up Next Gen T680 uses a different headlight and is not covered.
Are the high and low beams LED?
Yes. High beam, low beam, and the C-shaped DRL are built-in LED. No separate headlight bulbs are required.
Are these a complete pair?
Yes. You get the driver-side and passenger-side headlight assemblies.