Black Full LED Projector Headlights Pair w/ Module for Chrysler Pacifica (2021-2026)

Black Full LED Projector Headlights Pair w/ Module for Chrysler Pacifica (2021-2026)

$357.95
Skip to product information
Black Full LED Projector Headlights Pair w/ Module for Chrysler Pacifica (2021-2026)

Black Full LED Projector Headlights Pair w/ Module for Chrysler Pacifica (2021-2026)

$357.95
DS-68428559AC

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Replace cracked or hazy headlights on your 2021-2026 Pacifica with this brand-new black full LED projector pair with LED module.

Fitment

Year Make / Model Fits
2021-2026 Chrysler Pacifica with factory LED projector headlights Factory LED headlights

Will NOT fit: Halogen models; 2017-2020 Pacifica; Voyager.

Common Reasons to Replace

  • Yellowed, hazy, or oxidized lenses reducing light output
  • Cracked lens or broken mounting tabs
  • Moisture or condensation inside the housing
  • Collision damage

Specs

  • Low/high beam, DRL, turn: built-in LED
  • LED module: included
  • DOT compliant
  • Quantity: Pair (Left + Right)
  • Condition: New

Interchange Part Numbers

OEM: 68428559AC, 68428559AA, 68428559AB, 68428558AA, 68428558AB. Partslink: CH2502342, CH2503342.

What's Included

  • 1 x Driver side headlight assembly
  • 1 x Passenger side headlight assembly
  • LED module included

Installation

  1. Disconnect the negative battery cable. Remove the belly pan, the wheelhouse-shield screws and fascia-to-fender screws on both sides.
  2. Remove the grille push pins across the top, release the fascia clips, unplug both fascia harnesses and lift the fascia off.
  3. Unplug the headlamp, remove the upper bolts and push pin, the lower screw and the side bolt, unclip the harness and lift the lamp out.
  4. Transfer the fascia mounting bracket (five screws) to the new lamp, install it (top bolts 7 N-m), refit the fascia and aim the headlights.
  5. Note: this is the Chrysler procedure for 2017-2020; the 2021+ refresh uses the same fascia-off approach.

Steps compiled from Chrysler service procedure quoted on PacificaForums "Headlight Assembly Removal" thread. Professional installation and headlight aiming are recommended.

FAQs

Will these fit a 2020 Pacifica?
No. 2021 refresh and newer only.

Will these fit a halogen Pacifica?
No. Factory LED models only.

Do I need to remove the front bumper to replace these headlights?
Yes. The front fascia has to come off to reach the headlamp bolts.

Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.

You may also like