Black Halogen Headlights Pair for Freightliner Cascadia (2008-2017)
$269.95
Skip to product information
Black Halogen Headlights Pair for Freightliner Cascadia (2008-2017)
$269.95
DS-A0651907-BK
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit Freightliner Cascadia and Cascadia Evolution trucks from 2008 through 2017 that use the original teardrop housing. They will not fit 2018 and newer New Cascadia trucks, which use a completely different headlight. Compare your current lamps with our photos before ordering.
Replace faded or cracked first-generation Cascadia headlights with this black halogen pair. Each lamp has the original teardrop shape, a black housing, a clear lens, and a red reflector strip along the outer edge. They bolt into the same opening used on 2008-2017 Cascadia and Cascadia Evolution trucks.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2008-2017 | Freightliner Cascadia | First generation and Evolution, original teardrop housing |
Specs
- Sold as: driver and passenger pair
- Housing / style: black housing, clear lens, red reflector strip along the outer edge
- Lighting: halogen low and high beam
- Bulb sizes: H11 low beam and H11 high beam. Turn signal and side marker use a 3157 bulb.
- Operating voltage: 12V
- DOT / SAE marked on the lens
- Connects to the factory headlight connector, no splicing
- New aftermarket assemblies
- Warranty: 1 year
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
A06-51907-006, A06-51907-007, A06-51907-002, A06-51907-003, 888-5206, 888-5205
Installation: Freightliner Cascadia (2008-2017)
On 2008-2017 Cascadia and Evolution trucks the headlights sit in the hood opening, and you can reach them with the hood tilted forward. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Tilt the hood open and support it. If a mounting bolt is blocked, remove the grille for better access.
- Unplug the factory harness from the back of the old assembly. Remove the retaining bolts that hold the headlight in the hood opening and lift the housing out. Do not pull on the wiring.
- Set the new assembly in the same opening, start the bolts, and connect the factory headlight connector.
- Repeat on the other side, reinstall the grille if you removed it, reconnect the battery, and test low beam, high beam, turn signal, and the side marker. Aim the lamps on a level surface before driving at night.
Frequently Asked Questions
Which trucks do these headlights fit?
Freightliner Cascadia and Cascadia Evolution trucks from 2008 through 2017 with the original teardrop headlight housing. Compare your current lamps with our photos before ordering.
Will they fit a 2018 or newer New Cascadia?
No. 2018 and newer New Cascadia trucks use a different, more angular headlight and these assemblies will not interchange.
How is this pair different from the chrome version?
This pair uses a black housing with a red reflector strip along the outer edge. It fits the same 2008-2017 Cascadia opening as the chrome halogen pair.
Are these a bulb kit or complete assemblies?
These are complete driver and passenger headlight assemblies, not a bulb-only kit. They replace the entire factory housing.
How are they installed on a 2008-2017 Cascadia?
Tilt the hood, unplug the factory connector, unbolt the housing from the hood opening, and set the new lamp in the same place. Remove the grille only if you need more room to reach a bolt. Aim the lamps before nighttime driving.