Black Halogen Headlights Pair for Hino 145 165 185 238 258 268 338 358 (2005-2020)
$351.95
Skip to product information
Black Halogen Headlights Pair for Hino 145 165 185 238 258 268 338 358 (2005-2020)
$351.95
DS-81110E0530-BK
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the Hino conventional models and years listed below that use this black halogen housing. They will not fit 2021-up Hino cabs with a different headlight. Compare your current lamps with our photos before ordering.
Replace the factory lamps on your Hino conventional with this black halogen pair. Each assembly uses a clear lens with an amber reflector, mounts in the original opening, and includes H4 bulbs. Sold as a driver and passenger pair.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2006-2010 | Hino 145 | |
| 2006-2010 | Hino 165 | |
| 2006-2010 | Hino 185 | |
| 2006-2019 | Hino 238 | |
| 2006-2019 | Hino 258 | |
| 2008-2014 | Hino 258ALP | |
| 2006-2019 | Hino 258LP | |
| 2005-2020 | Hino 268 | |
| 2008-2014 | Hino 268A | |
| 2006-2008 | Hino 308 | |
| 2006-2019 | Hino 338 | |
| 2008-2014 | Hino 338CT | |
| 2008-2019 | Hino 358 |
Specs
- Condition: New
- Sold as: Driver and passenger pair
- Lighting: Halogen, with H4 bulbs included
- Housing: Black, clear lens, amber reflector
- Operating voltage: 12V
- Certification: DOT-certified
- Warranty: 1 year
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
- H4 bulbs as supplied
Interchange References
81110E0530, 81150E0530, 9HI94602501, 9HI94602502, 8885760, 8885759
Installation: Hino 145, 165, 185, 238, 258, 268, 308, 338, and 358 (2005-2020)
On these Hino conventionals the headlight is reached from the engine bay with the hood open. You usually do not need to remove the bumper. Professional installation and beam aiming are recommended.
- Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Tilt the hood open and support it. From the engine bay, unplug the harness at the back of the old assembly.
- Remove the mounting bolts that hold the lamp to the front header. Support the assembly as you take out the last bolt, then slide it forward off the alignment pins.
- Set the new assembly on the same pins, start the bolts by hand, and snug them evenly. Do not overtighten the housing ears. Reconnect the factory harness until it clicks.
- Repeat on the other side, reconnect the battery, and test every lighting function. Aim the lamps on level ground before driving at night.
Frequently Asked Questions
Which trucks do these headlights fit?
Hino 145, 165, 185, 238, 258, 268, 308, 338, and 358 trucks in the years listed below, including the ALP, LP, A, and CT variants shown. Compare your current lamps with our photos before ordering.
Will they fit a 2021 or newer Hino?
No. Later cabs use a different headlight. This pair covers the 2005-2020 conventional housing shown in our photos.
Do I need bulbs?
No. H4 bulbs are included.
Are these a complete pair?
Yes. You get the driver-side and passenger-side headlight assemblies.