Black Halogen Headlights Pair for Honda Accord Sedan (2008-2012)
$132.95
Skip to product information
Black Halogen Headlights Pair for Honda Accord Sedan (2008-2012)
$132.95
DS-33100TA0A01-BK
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: Sedan 4-door only; not the coupe. Bulbs are not included.
Black Halogen Headlights Pair for Honda Accord Sedan (2008-2012). New driver and passenger replacement assemblies with clear lenses. Match the original housing and factory lighting equipment before ordering.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2008-2012 | Honda Accord | Sedan 4-door only; not the coupe. Bulbs are not included. |
Specs
- Sold as: driver and passenger pair
- Lighting: Halogen
- Low beam 9006; high beam 9005; turn/marker 7528. Bulbs not included.
- DOT/SAE compliance stated in the product listing
Bulb sizes: 9006 | 9005 | 7528
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
33100TA0A01, 33150TA0A01, HO2503130
Installation: Honda Accord Sedan (2008-2012)
Professional installation and beam aiming are recommended. Switch off the lights and ignition before servicing.
- Remove the upper grille cover and release the front bumper-cover clips and wheel-well attachments on the 2008-2012 Accord sedan. Support the cover while separating the side retainers.
- Remove the three 10 mm headlamp bolts and disconnect the rear sockets. Transfer the lower headlamp support bracket from the original assembly if it is not supplied on the replacement.
- Transfer compatible 9006 low-beam and 9005 high-beam bulbs and signal sockets. Seat the bracket and locating tabs, secure the housing and reconnect the harness; refit the fascia, test all lamps and have beam aim checked.
Frequently Asked Questions
Which factory lighting configuration is compatible?
Sedan 4-door only; not the coupe. Bulbs are not included.
Which bulbs are used and included?
Low beam 9006; high beam 9005; turn/marker 7528. Bulbs not included.
What access is needed for installation?
The bumper cover must be released; the lower headlamp support bracket transfers from the original assembly. Professional installation and beam aiming are recommended.