Black Halogen Headlights Pair for Toyota Camry (2012-2014)
$100.95
Skip to product information
Black Halogen Headlights Pair for Toyota Camry (2012-2014)
$100.95
DS-8115006470
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: Fits 2012-2014 Toyota Camry halogen models. Not compatible with factory Xenon HID headlight models. Bulbs are not included.
New driver-side and passenger-side halogen headlight assemblies with black housings. Sold as a left-and-right pair.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2012-2014 | Toyota Camry | Halogen models; not factory Xenon HID |
Specs
- Condition: New
- Sold as: Left and right headlight pair
- Housing: Black
- Lighting type: Halogen
- Bulb application: H11 low beam; 9005 high beam
- Bulbs are not included.
In the Box
- 1 driver-side headlight assembly
- 1 passenger-side headlight assembly
Interchange References
8115006470, 8111006470, 8115006800, 8111006800, TO2502212, TO2503212, TO2502211, TO2503211.
Installation: 2012-2014 Toyota Camry
Professional installation and beam aiming are recommended.
- On the 2012-2014 Camry, release the front bumper cover after removing the upper grille/cover fasteners, wheel-arch fasteners and lower splash-shield attachments. Support the cover and disconnect fog-lamp wiring if equipped.
- Remove the headlamp mounting hardware and bumper-cover retainer at the lamp. Pull the housing forward off its locating pins, then disconnect the electrical connectors without pulling on the wires.
- Transfer compatible halogen bulbs and sockets, seat the locating pins and reinstall the lamp hardware. Refit the bumper retainers and cover, reconnect any fog lamps, then test low/high beams and signal lamps and check beam aim.
Frequently Asked Questions
Can these replace factory HID Camry headlights?
No. These halogen assemblies exclude factory Xenon HID headlight models.
Are bulbs included with this pair?
No. The package contains the left and right headlight assemblies; bulbs are not included.
What bulbs do these headlights use?
H11 low beam; 9005 high beam. Use compatible bulbs and sockets when installing the assemblies.