Black Halogen Projector Headlights Pair w/ Bulbs for Chevy Impala 7-Pin (2014-2020)
$195.95
Skip to product information
Black Halogen Projector Headlights Pair w/ Bulbs for Chevy Impala 7-Pin (2014-2020)
$195.95
DS-23405242
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed or foggy headlights on your 2014-2020 Chevrolet Impala with factory halogen (7-pin) headlights with this brand-new pair of black halogen projector headlight assemblies, bulbs included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2014-2020 | Chevrolet Impala LS, LT (halogen, 7-pin) | Factory halogen projector headlights |
Will NOT fit: Impala with factory HID (8-pin connector); 2014-2016 Impala Limited (older body).
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Housing: Black
- High/low beam: 9012
- Turn signal: 7444NA
- Side marker: 194
- Connector: 7-pin
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 23405242. Partslink: GM2502417 GM2503417.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Bulbs included
Installation
- Disconnect the battery. Remove the push pins on the radiator cover and the T20 screws along the top of the bumper.
- Remove the 10 mm bolts behind each fender, the T20 fender-liner screws and the 7 mm bumper bolts behind the liners.
- Remove the lower 7 mm bolts and push pins, unplug the fog lights and pull the bumper cover forward.
- Remove the four headlamp screws, unplug and remove the lamp.
- Fit the new lamp, refit the bumper cover and aim.
Steps compiled from ReveMoto 2014-2020 Impala bumper removal guide and Impala Forums headlight thread. Professional installation and headlight aiming are recommended.
FAQs
What bulb sizes do these headlights use?
Per the listing image: high/low beam 9012, signal light 7444NA and side marker 194.
How do I know if my Impala has halogen or HID headlights?
Check the connector. Per the listing, halogen lamps (these) use a 7-pin plug; HID lamps use an 8-pin plug and will not match.
Do I need to remove the front bumper to replace these headlights?
Yes. On the 2014-2020 Impala the bumper cover comes off (radiator cover push pins, top T20 screws, 10 mm and 7 mm bolts behind the liners); then four screws hold the headlamp.
Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.