Black Halogen Projector Headlights Pair w/ Bulbs for Ford Edge Sport (2015-2018)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace hazy or cracked headlights on your 2015-2018 Ford Edge Sport with factory halogen headlights with this new black pair. Bulbs are included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2015-2018 | Ford Edge Sport with factory halogen headlights | Factory halogen headlights |
Will NOT fit: HID cars; Edge SE/SEL chrome lamps (see our chrome version); 2019+ Edge.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Type: Halogen projector
- Bulbs: included; match your factory bulbs (reuse them if needed)
- Housing: Black
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: FO2502342. Partslink: FT4Z13008J, FT4Z13008D.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- Bulbs included (per listing)
Installation
- Turn the lights off, open the hood and disconnect the negative battery cable.
- Remove the two 10 mm bolts and the plastic retainer at the top rear of the headlamp.
- Pull the rear corner of the lamp up to release it from the retainer on the cross member and the clip into the top of the bumper cover, then unplug it. (Ford's service manual has the bumper cover removed; owners report it is not required.)
- Clip the new halogen lamp into the bumper cover, plug it in, refit the bolts and retainer and aim the headlights.
Steps compiled from Ford Edge Forum "15/16 Front Turn Signal Lamps" thread (owner manual vs service manual); ford-edge.repair-car.com headlight housing/bumper cover procedure; r/FordEdge 2015 headlight thread. Professional installation and headlight aiming are recommended.
FAQs
Will these fit an Edge SE or SEL?
These are the black Sport-style lamps. SE/SEL cars use the chrome version.
Will these fit an Edge with HID?
No. These are for factory halogen cars only.
Do I need to remove the front bumper to replace these headlights?
Usually no. Owners report the lamp comes out from the top after removing two bolts and a retainer.
What bulb sizes do these use?
The listing images do not state the bulb sizes. Bulbs are included; match your factory bulb sizes if you ever replace them.
Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.