Black Halogen Projector Headlights Pair with LED DRL for Toyota Highlander SE / Limited / Hybrid Limited (2017-2019)
$361.95
Skip to product information
Black Halogen Projector Headlights Pair with LED DRL for Toyota Highlander SE / Limited / Hybrid Limited (2017-2019)
$361.95
DS-811500E360
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit only the 2017-2019 Toyota Highlander SE, Limited and Hybrid Limited (3.5L V6), plus the 2019 Limited Platinum and Hybrid Limited Platinum, that came with factory halogen projector headlights with built-in LED daytime running lights. They will not fit the LE, LE Plus, XLE or any Highlander whose headlights have no LED DRL strip, the 2014-2016 or 2011-2013 Highlander (different lamps), or the 2020 and newer model. Low and high beam bulbs and sockets are not included; the LED DRL and other small bulbs come installed.
Restore the sharp look of your refreshed Highlander. This pair replaces faded, cloudy or cracked 2017-2019 SE and Limited headlights with crisp clear lenses, a halogen projector low beam and the curved LED daytime running light built into each lamp. Each one bolts to the factory mounting points and plugs into the factory connectors, with no splicing.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2017-2019 | Toyota Highlander | SE, Limited and Hybrid Limited (3.5L V6) with factory halogen projector headlights with built-in LED DRL. Limited Platinum and Hybrid Limited Platinum 2019. |
Specs
- Sold as: driver and passenger pair
- Housing: black with chrome accents, clear lens, amber corner
- Low beam: halogen projector; high beam: halogen reflector
- Daytime running light: LED, built in
- Low and high beam bulbs and sockets not included; LED DRL and small bulbs pre-installed
- DOT and SAE compliant
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen projector headlight with LED DRL
- Passenger-side halogen projector headlight with LED DRL
Interchange References
Replaces the original assemblies commonly crossed with 81150-0E360, 81110-0E360, 81150-0E390, 81110-0E390, 81150-0E362, 81110-0E362, 81150-0E560, 81110-0E560, TO2502258, TO2503258, TO2502253, TO2503253, TO2502290, TO2503290, TO2502285, TO2503285.
Installation: Toyota Highlander SE / Limited (2017-2019)
On the 2017-2019 Highlander the headlight bolts are reached after the front bumper cover comes off. Allow a couple of hours and get a helper to hold the bumper. Turn the lights and ignition off before you start.
- Remove the upper radiator support cover and its clips, then the splash shield fasteners under the bumper and the fender liner clips at the front of each wheel well.
- Release the bumper cover at each fender, unplug the fog light and any sensor connectors, and pull the cover forward off the car.
- Remove the two upper headlight bolts and the bolt near the fender, release the lower retaining tab and pull the lamp forward far enough to unplug its connectors.
- Move your low and high beam bulbs and sockets to the new lamp, plug in the connectors, seat the tab and tighten the bolts evenly.
- Refit the bumper cover and every clip, test low, high, LED DRL and turn signal functions, then aim the beams.
Frequently Asked Questions
Which vehicles do these headlights fit?
2017-2019 Toyota Highlander SE, Limited and Hybrid Limited (3.5L V6), plus 2019 Limited Platinum and Hybrid Limited Platinum, with factory halogen projector headlights with LED DRL. They do not fit the LE, LE Plus or XLE. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Will these fit my Highlander XLE?
No. The 2017-2019 LE, LE Plus and XLE use a headlight without the built-in LED DRL strip. This pair is only for trims whose factory lamps have the LED DRL.
Are bulbs included?
No. Bulbs and sockets are not included. Move your factory ones to the new lamps.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2017-2019 Toyota Highlander SE / Limited?
The front bumper cover has to come off. Then remove the two upper bolts and the side bolt, release the lower tab, unplug the lamp, move your low and high beam bulbs over and install the new one. Aim the beams when you are done.