Black HID Headlights Pair for Chevrolet Corvette C7 (2014-2019)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed or cracked headlights on your 2014-2019 C7 Corvette with this brand-new black HID pair. Reuse your factory bulbs and ballasts.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2014-2019 | Chevrolet Corvette (C7) with factory HID headlights | Factory HID headlights |
Will NOT fit: C7 cars with factory full-LED headlights; C6/C8.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low beam: HID, match your factory bulbs (reuse them)
- Housing: Black
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 84750165, GM2502403, GM2503403. Partslink: .
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- HID bulbs and ballasts are NOT included; reuse your factory ones
Installation
- Disconnect the negative battery cable (HID high voltage). Open the hood and remove the six upper fender flange bolts on the side being serviced.
- Raise and support the car; remove the front wheelhouse liner fasteners.
- Remove the front bumper fascia (protect the fender edges with painter's tape; release the nose tabs straight up).
- Remove the three lower headlamp nuts from the front wheelhouse panel and unplug the headlamp connectors.
- Lift the front corner of the fender about two inches and lift the headlamp off its studs.
- Install in reverse: headlamp nuts 2 Nm (18 lb-in), fender flange bolts 10 Nm (89 lb-in); align the fascia brackets and have the aim checked.
Steps compiled from GM service procedure for Corvette HID headlamp replacement (fender flange bolts / three lower nuts, torques) as quoted in CorvetteForum C7 "Front Fender and Headlamp Removal" (factory service manual) and C7 "Remove/Replace Front Bumper Fascia" threads. Professional installation and headlight aiming are recommended.
FAQs
Will these fit an LED-headlight C7?
No. Factory HID cars only.
Do I need to remove the fender?
Lift the front fender corner about two inches after loosening its six flange bolts; it does not come off.
Do I need to remove the front bumper to replace these headlights?
Yes. The front fascia comes off first.
Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.