Black HID Projector Headlights Pair for Acura TSX (2004-2005)
$189.95
Skip to product information
Black HID Projector Headlights Pair for Acura TSX (2004-2005)
$189.95
DS-33151SECA12
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2004-2005 Acura TSX sedan with factory HID (xenon) headlights. They will not fit the 2006-2008 facelifted TSX (different lamp with a clear turn signal) or the 2009-2014 TSX. The D2S HID bulbs, HID ballasts and igniters, and all other bulbs and sockets are not included; move them over from your original headlights.
Bring back the clean, upscale look of the first TSX. This black-housing projector pair replaces hazy, yellowed or cracked 2004-2005 headlights with crisp clear lenses, projector low beams and the original amber turn signals. They mount to the factory points and accept your factory HID parts, so the swap keeps your original light output.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2004-2005 | Acura TSX | Base sedan, 2.4L, factory HID headlights. Before the 2006 facelift. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, amber turn signal
- Low beam: projector for factory D2S HID (bulb, ballast and igniter not included)
- High beam: halogen reflector (bulb not included)
- DOT compliant
- Mounts to the factory points; reuse your factory HID components and sockets
In the Box
- Driver-side HID projector headlight assembly
- Passenger-side HID projector headlight assembly
Interchange References
Replaces the original assemblies commonly crossed with 33151-SEC-A12, 33101-SEC-A12, 33151-SEC-A11, 33101-SEC-A11, AC2518106, AC2519106.
Installation: Acura TSX (2004-2005)
On the 2004-2005 TSX the front bumper has to come off to reach the four headlight bolts. Because these lamps reuse your factory HID parts, set aside extra time to move the ballast, igniter and bulbs. Turn the lights off, disconnect the battery and wait a few minutes before touching HID parts, which can hold dangerous voltage.
- Remove the radiator cover clips, the bolts and clips under the bumper and the screws in each wheel well. Release the fender clips and the clips under the headlights.
- Pull the bumper forward with a helper, unplug the fog lights and set it aside.
- Unplug the headlight connectors, remove the four mounting bolts and the harness clip while supporting the lamp, and lift it out.
- Move the D2S HID bulb, ballast, igniter, high-beam bulb, sockets and the corner upper beam bracket from the old lamp to the new one.
- Bolt the new lamp in, reconnect it, refit the bumper (make sure the hooks and clips seat), reconnect the battery, test all lights and aim the beams.
Frequently Asked Questions
Which vehicles do these headlights fit?
2004-2005 Acura TSX sedans with factory HID headlights. They do not fit the 2006-2008 or 2009-2014 TSX. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Do these come with HID bulbs or ballasts?
No. The D2S HID bulbs, ballasts, igniters and all other bulbs and sockets are not included. Move them over from your original headlights.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2004-2005 Acura TSX?
Remove the front bumper, unbolt the headlight (four bolts), and move your HID bulb, ballast, igniter, bulbs and sockets to the new lamp before bolting it in. Take care with HID components, which carry high voltage.