Black HID Projector Headlights Pair w/ AFS CTS-V Style for Cadillac CTS (2015-2019)

Black HID Projector Headlights Pair w/ AFS CTS-V Style for Cadillac CTS (2015-2019)

$1,182.95
Skip to product information
Black HID Projector Headlights Pair w/ AFS CTS-V Style for Cadillac CTS (2015-2019)

Black HID Projector Headlights Pair w/ AFS CTS-V Style for Cadillac CTS (2015-2019)

$1,182.95
DS-84319721

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Upgrade your 2015-2019 Cadillac CTS sedan from the chrome-housing headlights to the blacked-out CTS-V style with this brand-new pair of HID projector headlight assemblies with AFS and LED running lights. Half assembly: reuse your D3S bulbs and ballasts.

Fitment

Year Make / Model Fits
2015-2019 Cadillac CTS sedan Factory HID/Xenon headlights with AFS (chrome housing upgrade to black)

Will NOT fit: CTS without factory HID/AFS; 2014 CTS; CTS coupe/wagon (previous generation).

Common Reasons to Replace

  • Yellowed, hazy, or oxidized lenses reducing light output
  • Cracked lens or broken mounting tabs
  • Moisture or condensation inside the housing
  • Collision damage

Specs

  • Housing: Black (CTS-V style)
  • Lens: Clear
  • High/low beam: D3S HID/Xenon (not included)
  • Running lights: LED (included)
  • AFS: adaptive projector
  • DOT compliant
  • Quantity: Pair (Left + Right)
  • Condition: New

Interchange Part Numbers

OEM: 84319721, 23211665, 23308671, 23330244, 84159623, 23211664, 84159622, 23330243. Partslink: GM2502467,GM2503467.

What's Included

  • 1 x Driver side headlight assembly
  • 1 x Passenger side headlight assembly
  • Half assembly: HID bulbs, ballasts, and high-voltage wires are NOT included; reuse yours

Installation

  1. Park on level ground, turn the engine off, and disconnect the negative battery cable.
  2. Open the hood and remove the clips/bolts holding the grille or upper bumper cover as needed to reach the headlight bolts.
  3. Remove the headlight mounting bolts, pull the headlight forward, and unplug the connector(s).
  4. Plug in the new headlight and test low beam, high beam, turn signal, and marker lights before mounting.
  5. Bolt the new headlight in place and reinstall trim and clips.
  6. Reconnect the battery and aim the headlights against a flat wall before night driving.

Professional installation is recommended if you are unsure.

FAQs

What bulbs do these headlights use?
High and low beam use a D3S HID bulb (not included). The LED running lights are built in.

Can I install LED or HID bulbs?
These are already HID housings and are not for halogen cars.

Will these fit my chrome-housing CTS?
Yes, they are a direct upgrade from the factory chrome-housing HID headlights with AFS.

Will these fit a 2014 CTS?
No. They fit the 2015-2019 refresh only.

You may also like