Black Projector Halogen Headlights Pair for Subaru Impreza (2008-2011)
$163.95
Skip to product information
Black Projector Halogen Headlights Pair for Subaru Impreza (2008-2011)
$163.95
DS-84001FG241-BK
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: Fits 2008-2011 Subaru Impreza with factory halogen headlights only. Not compatible with factory HID headlights. Bulbs are not included.
New black projector halogen headlights, sold as a driver-side and passenger-side pair for the 2008-2011 Subaru Impreza (factory halogen) application listed below.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2008-2011 | Subaru Impreza | Factory halogen only; excludes HID |
Specs
- Condition: New
- Sold as: Left and right pair
- Style: Black Projector
- Lighting type: Halogen
- Bulb application: H11 low beam; 9005 high beam; 1157A signal
- Bulbs not included
In the Box
- 1 driver-side headlight assembly
- 1 passenger-side headlight assembly
Interchange References
84001FG241, 84001FG251, SU2502125, SU2503125
Installation: 2008-2011 Subaru Impreza (factory halogen)
Professional installation and beam aiming are recommended.
- Disconnect the battery ground cable. When removing the passenger-side (RH) lamp, remove the air intake duct first. Then remove the front bumper: release its upper clips, wheel-well pins and lower fasteners and pull it forward, unplugging the fog lamps if equipped.
- Disconnect the headlight harness connectors, remove the five mounting bolts and disengage the retaining clip, then lift the assembly out. Swap the lower mounting bracket to the new housing if your original lamp carries it.
- Fit compatible H11 low-beam, 9005 high-beam and 1157-type signal bulbs. Install in reverse order, refit the intake duct on the RH side, reconnect the battery, test all functions and have the beams aimed.
Frequently Asked Questions
What should I check before ordering?
Fits 2008-2011 Subaru Impreza with factory halogen headlights only. Not compatible with factory HID headlights. Bulbs are not included.
Are bulbs included?
No. This package contains the headlight assemblies only; bulbs are not included.
What access is needed to replace the assemblies?
Disconnect the battery ground cable. When removing the passenger-side (RH) lamp, remove the air intake duct first. Then remove the front bumper: release its upper clips, wheel-well pins and lower fasteners and pull it forward, unplugging the fog lamps if equipped.