Black Projector Halogen Headlights Pair with LED DRL for Chevrolet Camaro (2010-2013)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
New black-housing projector headlight pair with dual-color LED tube DRL for the 2010-2013 Chevrolet Camaro (factory halogen cars). H7 low projector. The seller lists bulbs as included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2010-2013 | Chevrolet / Camaro (5th gen) | Factory halogen headlights |
Will NOT fit: Camaros with factory HID headlights, or the 2014-2015 facelift.
Common Reasons to Replace
- Yellowed, hazy, or cracked factory lenses cutting light output
- Moisture or condensation inside the housing
- Broken mounting tabs or collision damage
- Refreshing the front end with a new black look
Specs
- Light type: Halogen projector (H7) + LED DRL / amber LED turn signal
- Housing: Black, clear lens
- Bulbs: Low/high beam H7, DRL LED (built-in) (bulbs included)
- Lens: Polycarbonate; housing: polypropylene
- DOT & SAE compliant
- Fitment type: Direct replacement, plug-and-play connectors
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 92232124, 92232125 · Partslink: GM2502346, GM2503346
What's Included
- 1 x Driver-side headlight assembly
- 1 x Passenger-side headlight assembly
- Bulbs included: Low/high beam H7, DRL LED (built-in)
Installation (2010-2013 Chevrolet Camaro)
Tools: 10 mm socket and ratchet, T15/T30 Torx, push-pin tool.
- Disconnect the negative battery cable.
- Remove the upper fascia push pins and fasteners, and the wheel-well liner fasteners at the front.
- Remove the front fascia.
- Remove the headlight mounting bolts and pull the lamp forward.
- Unplug and install the new lamp, reconnect and test.
- Refit the fascia and aim the beams.
Steps based on GM 2010-2013 Camaro service information headlamp replacement (front fascia removal).
FAQ
Will these fit a 2014 Camaro?
No. The 2014-2015 facelift uses a different headlight. This pair is for 2010-2013.
Will these fit a Camaro with factory HID?
No. This pair is built for halogen-equipped cars.
What bulb sizes do these use?
Low/high beam H7, DRL LED (built-in) (bulbs included).
Can I put LED bulbs in these?
Yes. The projector uses an H7 bulb, so an H7 LED conversion kit fits. The DRL ring is built-in LED.