Black Smoke Halogen Tail Lights Pair for Chevy Silverado / GMC Sierra Stepside (1999-2004)

Black Smoke Halogen Tail Lights Pair for Chevy Silverado / GMC Sierra Stepside (1999-2004)

$111.95
Skip to product information
Black Smoke Halogen Tail Lights Pair for Chevy Silverado / GMC Sierra Stepside (1999-2004)
  • Black Smoke Halogen Tail Lights Pair for Chevy Silverado / GMC Sierra Stepside (1999-2004)
  • Driver and passenger black smoke halogen tail lights for Chevy Silverado Stepside 1999-2004, front view
  • 1999-2004 GMC Sierra Sportside black smoke halogen tail light pair at an angle
  • Three-quarter view of a 1999-2004 Chevy Silverado Stepside black smoke halogen tail light
  • Close-up of the smoked lens on a 1999-2004 Chevy Silverado Stepside halogen tail light
  • Back housings of the 1999-2004 Chevy Silverado and GMC Sierra Stepside halogen tail light pair
  • Back-housing detail on a 1999-2004 Chevy Silverado Stepside halogen tail light
  • 1999-2004 Chevy Silverado Stepside black smoke halogen tail lights installed on the truck
Black Smoke Halogen Tail Lights Pair for Chevy Silverado / GMC Sierra Stepside (1999-2004)

Black Smoke Halogen Tail Lights Pair for Chevy Silverado / GMC Sierra Stepside (1999-2004)

$111.95
DS-GM2801136

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Fitment warning: These tail lights fit Chevrolet Silverado and GMC Sierra with a Stepside or Sportside bed (1999-2004) only. They will not fit fleetside (standard bed) trucks, 1998 or earlier C/K, or 2005-up trucks. Compare your current housings with our photos before ordering — the stepside lamp is a compact two-circle housing that sits at the rear of the fender, not the taller fleetside bedside lamp.

Give a GMT800 stepside truck a smoked look with this black halogen pair. You get driver and passenger assemblies in a black housing with a smoked lens over the stacked tail, brake, and reverse sections. Reuse your existing halogen bulbs — bulbs are not included. The housings use the factory mounting points and factory-style connectors.

Fitment

Years Vehicle Notes
1999-2004 Chevrolet Silverado 1500 Stepside / Sportside bed only. Not fleetside
2001-2003 Chevrolet Silverado 1500 HD Stepside / Sportside only
1999-2004 Chevrolet Silverado 2500 Stepside / Sportside only
2001-2004 Chevrolet Silverado 2500 HD Stepside / Sportside only
2001-2004 Chevrolet Silverado 3500 Stepside / Sportside only
1999-2004 GMC Sierra 1500 Stepside / Sportside only
2001-2003 GMC Sierra 1500 HD Stepside / Sportside only
1999-2004 GMC Sierra 2500 Stepside / Sportside only
2001-2004 GMC Sierra 2500 HD Stepside / Sportside only
2001-2004 GMC Sierra 3500 Stepside / Sportside only

Specs

  • Sold as: a driver and passenger pair
  • Style: black housing, smoke lens
  • Lighting: halogen tail, brake, turn, and reverse; bulbs not included
  • DOT certified
  • 12 V
  • New aftermarket assemblies
  • OEM cross-reference: GM2801136, GM2088136, 19169012, 19169013, 15224277

What’s in the box

  • Driver tail light assembly
  • Passenger tail light assembly

Installation

  1. Open the tailgate so you can reach the fasteners at the rear of each stepside fender.
  2. Remove the screws or nuts that hold the compact housing to the fender.
  3. Pull the housing straight back, then unplug the factory connector and twist out the bulb sockets.
  4. Transfer the bulbs and sockets into the new housing, seat it on the factory mounting points, reconnect, and tighten the fasteners.
  5. Repeat on the other side, then check tail, brake, turn, and reverse functions before closing the tailgate.

A do-it-yourself installer can usually finish both sides in about 20-30 minutes with basic hand tools. Always disconnect the negative battery cable before you start and torque fasteners to the factory specification.

You may also like