Chrome Halogen Headlights Pair for GMC Yukon and Yukon XL (2007-2014)
$102.95
Skip to product information
Chrome Halogen Headlights Pair for GMC Yukon and Yukon XL (2007-2014)
$102.95
DS-GM2502265
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2007-2014 GMC Yukon and Yukon XL with factory halogen lamps (GM2502265 / GM2503265). They will not fit Denali projector or HID lamps, Chevrolet Tahoe or Suburban, 1999-2006 Yukon / Yukon XL (1999-2007 Sierra and 2000-2006 Yukon XL halogen pair), or 2015-up Yukon / Yukon XL (2015-2017 Yukon / Yukon XL halogen pair).
Replace faded or cracked factory halogen lamps on your 2007-2014 Yukon or Yukon XL with this OE-style chrome-housing pair. Each lamp has the quad-reflector halogen low and high beam in a single 9008 dual-beam bulb and an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your 9008 bulbs, or add new ones.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2007-2014 | GMC Yukon | Factory halogen only. Not Denali projectors or HID. Not Tahoe or Suburban. |
| 2007-2014 | GMC Yukon XL | Factory halogen only. Not Denali projectors or HID. Not Tahoe or Suburban. |
Specs
- Sold as: driver and passenger pair
- Housing: chrome, clear lens, amber side marker
- Low and high beam: 9008 dual-beam
- Bulbs not included — reuse your bulbs
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen headlight
- Passenger-side halogen headlight
Interchange References
Replaces the original assemblies commonly crossed with GM2502265, GM2503265.
Installation: GMC Yukon and Yukon XL (2007-2014)
On the 2007-2014 Yukon and Yukon XL the grille is removed so you can reach the headlight bolts. A full bumper-cover removal is usually not required. Work with a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood. Remove the grille fasteners and ease the grille forward enough to reach the inner headlight bolts.
- Remove the remaining fasteners at the inner fender and upper core support.
- Unplug the headlight connector, remove the mounting bolts and lift the lamp out.
- Transfer your 9008 bulb if you are reusing it. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
- Refit the grille, reconnect the battery, and test low beam, high beam and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Which vehicles do these headlights fit?
2007-2014 GMC Yukon and Yukon XL with factory halogen headlights. They do not fit Denali projector or HID lamps, Tahoe or Suburban, or 1999-2006 or 2015-up Yukon / Yukon XL.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Will these fit a Yukon Denali?
No. Denali projector lamps and factory HID use a different housing. This pair is the standard halogen quad-reflector lamp only.
Will these fit a Tahoe or Suburban?
No. Those vehicles use different parts. This pair is for GMC Yukon and Yukon XL only.
Are bulbs included?
No. Reuse your 9008 dual-beam bulbs, or add new ones.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2007-2014 GMC Yukon or Yukon XL?
The grille is removed so you can reach the headlight bolts. A full bumper-cover removal is usually not required. Then unplug the lamp, transfer your bulb if you are reusing it, install the new lamp and aim the beams.