Chrome Halogen Headlights Pair for Honda Odyssey (2011-2017)

New driver-side and passenger-side halogen headlight assemblies with chrome housings. Sold as a left-and-right pair.

Fitment

Specs

• Condition: New
• Sold as: Left and right headlight pair
• Housing: Chrome
• Lighting type: Halogen
• Bulb application: H11 low beam; 9005 high beam
• Bulbs are not included.

Shop by bulb size: H11 | 9005

In the Box

• 1 driver-side headlight assembly
• 1 passenger-side headlight assembly

Interchange References

33150TK8A01, 33100TK8A01, HO2502142, HO2503142.

Installation: 2011-2017 Honda Odyssey

Professional installation and beam aiming are recommended.

1. For the 2011-2017 Odyssey, remove the intake duct and top trim panel to reach the grille bolts. Remove the wheel-well screws and lower bumper fasteners, then release the bumper corners and retainers below the headlights.
2. Support the bumper cover clear of the headlamps. Remove the upper push retainer and headlamp/bracket bolts, pull the assembly forward only far enough to disconnect its bulb plugs and harness clips, then lift it out.
3. Transfer the lower support bracket and compatible halogen bulbs and sockets. Align the bracket tabs and fender locating pins before tightening the lamp hardware. Refit the bumper, intake duct and trim, test all lighting functions and have the beam aim checked.

Frequently Asked Questions

Does an Odyssey headlight swap require removing the intake duct?
The documented 2011-2017 procedure removes the intake duct and upper trim before the grille/bumper cover, then transfers the lower headlamp bracket.

Are bulbs included with this pair?
No. The package contains the left and right headlight assemblies; bulbs are not included.

What bulbs do these headlights use?
H11 low beam; 9005 high beam. Use compatible bulbs and sockets when installing the assemblies.