Chrome Halogen Headlights Pair for International WorkStar 7300 7400 7600 7700 (2008-2022)
$521.95
Skip to product information
Chrome Halogen Headlights Pair for International WorkStar 7300 7400 7600 7700 (2008-2022)
$521.95
DS-3605816C92
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit International WorkStar 7300 and 7400 (2015-2020), WorkStar 7600 (2008-2022), and WorkStar 7700 (2008-2012) that use this chrome dual-round housing. They will not fit every WorkStar from 2001-2021; only the models and years in the table below are covered. Compare your current lamps with our photos before ordering.
Replace the factory lamps on these International WorkStar trucks with this chrome halogen pair. Each assembly uses the dual-round layout with a chrome bezel and amber reflector. Sold as a driver and passenger pair, with bulbs as supplied.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2015-2020 | International WorkStar 7300 | |
| 2015-2020 | International WorkStar 7400 | |
| 2008-2022 | International WorkStar 7600 | |
| 2008-2012 | International WorkStar 7700 |
Specs
- Condition: New
- Sold as: Driver and passenger pair
- Lighting: Halogen, with bulbs as supplied
- Housing: Chrome bezel, amber reflector
- Operating voltage: 12V
- Certification: DOT-certified
- Warranty: 1 year
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
- Bulbs as supplied
Interchange References
3605816C92, 3605817C92, 8885102, 8885101
Installation: International WorkStar 7300, 7400, 7600, and 7700 (2008-2022)
On these WorkStar conventionals the headlight is reached from the engine bay with the hood open. You usually do not need to remove the bumper. Professional installation and beam aiming are recommended.
- Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Tilt the hood open and support it. From the engine bay, unplug the harness at the back of the old assembly.
- Remove the mounting bolts that hold the lamp to the front header. Support the assembly as you take out the last bolt, then slide it forward off the alignment pins.
- Set the new assembly on the same pins, start the bolts by hand, and snug them evenly. Do not overtighten the housing ears. Reconnect the factory harness until it clicks.
- Repeat on the other side, reconnect the battery, and test every lighting function. Aim the lamps on level ground before driving at night.
Frequently Asked Questions
Which trucks do these headlights fit?
International WorkStar 7300 and 7400 (2015-2020), WorkStar 7600 (2008-2022), and WorkStar 7700 (2008-2012) with this chrome dual-round housing. Compare your current lamps with our photos before ordering.
Will they fit every WorkStar from 2001 to 2021?
No. Only the models and years in the fitment table are covered.
Are these a complete pair?
Yes. You get the driver-side and passenger-side headlight assemblies, with bulbs as supplied.