Chrome Halogen Headlights Pair for Kenworth T680 Next Gen (2022-2026)
$971.95
Skip to product information
Chrome Halogen Headlights Pair for Kenworth T680 Next Gen (2022-2026)
$971.95
DS-P546157100-CH
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit Kenworth T680 Next Gen trucks (2022-2026) that use this chrome halogen housing. They will not fit 2013-2021 T680 trucks, which use a different headlight, and they will not fit T880 or other Kenworth models. Compare your current lamps with our photos before ordering.
Replace the factory lamps on your 2022-2026 Kenworth T680 Next Gen with this chrome halogen pair. Each assembly uses the factory-style clear lens with an amber corner, mounts in the Next Gen opening, and includes the bulbs. Sold as a driver and passenger pair.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2022-2026 | Kenworth T680 | Next Gen housing only; not the 2013-2021 aero lamp |
Specs
- Condition: New
- Sold as: Driver and passenger pair
- Lighting: Halogen, with bulbs included
- Housing: Chrome, clear lens, amber corner
- Operating voltage: 12V
- Certification: DOT-certified
- Warranty: 1 year
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
- Bulbs as supplied
Interchange References
P54-6157-100, P546157100, P54-6157-100R, P546157100R
Installation: Kenworth T680 Next Gen (2022-2026)
On a Next Gen T680 the headlight is reached from the engine bay with the hood open. You usually do not need to remove the bumper. Professional installation and beam aiming are recommended.
- Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Tilt the hood open and support it. From the engine bay, unplug the harness at the back of the old assembly.
- Remove the mounting bolts that hold the lamp to the front header. Support the assembly as you take out the last bolt, then slide it forward off the alignment pins.
- Set the new assembly on the same pins, start the bolts by hand, and snug them evenly. Do not overtighten the housing ears. Reconnect the factory harness until it clicks.
- Repeat on the other side, reconnect the battery, and test every lighting function. Aim the lamps on level ground before driving at night.
Frequently Asked Questions
Which trucks do these headlights fit?
Kenworth T680 Next Gen trucks from 2022 through 2026 with this chrome halogen housing. Compare your current lamps with our photos before ordering.
Will they fit a 2013-2021 T680?
No. The 2013-2021 T680 uses a different aero headlight. This pair is for the 2022-up Next Gen truck only.
Do I need bulbs?
No. Halogen bulbs are included with the assemblies.
Are these a complete pair?
Yes. You get the driver-side and passenger-side headlight assemblies.