Chrome Halogen Headlights Pair for Kia Sportage (2005-2008)
$290.95
Skip to product information
Chrome Halogen Headlights Pair for Kia Sportage (2005-2008)
$290.95
DS-921011F031
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2005-2008 Kia Sportage with the Type 1 factory halogen housing (92101-1F031 / 92102-1F031). Some 2008 Sportage headlights changed after a mid-year production date (often cited as March 24, 2008). A later Type 2 housing will not interchange. Confirm your lamps match these photos before you buy.
Replace faded or cracked factory halogen lamps on your 2005-2008 Sportage with this OE-style chrome-housing pair. Each lamp uses a 9003 dual-beam bulb, has an amber side marker, and bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your 9003 bulbs, or add new ones.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2005-2008 | Kia Sportage | 2nd gen Type 1 factory halogen (92101-1F031). Some late-2008 Type 2 lamps will not interchange — match these photos. |
Specs
- Sold as: driver and passenger pair
- Housing: chrome, clear lens, amber side marker
- Low and high beam: 9003 dual-beam
- Bulbs not included — reuse your bulbs
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen headlight (92101-1F031)
- Passenger-side halogen headlight (92102-1F031)
Interchange References
Replaces the original assemblies commonly crossed with 92101-1F031, 92102-1F031, KI2502115, KI2503115.
Installation: Kia Sportage (2005-2008)
On the 2005-2008 Sportage you can usually reach the headlight bolts after opening the hood; some cars also need the grille or the bumper cover loosened. Work with a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood and locate the headlight mounting bolts and the connector at the back of the lamp. If a bolt is hidden, loosen the grille or the bumper corner rather than forcing the lamp.
- Unplug the connector, remove the mounting bolts and lift the lamp out.
- Transfer your 9003 dual-beam bulbs if you are reusing them. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
- Refit the grille or bumper if you loosened them, reconnect the battery, and test low beam, high beam and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Will these fit a late-2008 Sportage?
Some 2008 lamps changed after a mid-year production date, often cited as March 24, 2008. If your housings do not match these photos, they are a different type and will not interchange.
Do I need new bulbs?
No. Reuse your 9003 dual-beam bulbs, or add new ones. Bulbs are not included.
Do I have to cut or splice wiring?
No. The lamps plug into the factory connectors and bolt to the factory points.