Chrome Halogen Headlights Pair for Lexus RX330 (2004-2006) RX400h (2006-2008) RX350 (2007-2009)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
New chrome halogen headlights, sold as a driver-side and passenger-side pair for the 2004-2006 Lexus RX330, 2006-2008 RX400h and 2007-2009 RX350 (factory halogen) application listed below.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2007-2009 | Lexus RX350 | Factory halogen only; excludes HID |
| 2006-2008 | Lexus RX400h | Factory halogen only; excludes HID |
| 2004-2006 | Lexus RX330 | Factory halogen only; excludes HID |
Specs
- Condition: New
- Sold as: Left and right pair
- Style: Chrome
- Lighting type: Halogen
- Bulb application: H11 low beam; 9005 high beam; WY21W signal
- Bulbs not included
In the Box
- 1 driver-side headlight assembly
- 1 passenger-side headlight assembly
Interchange References
811100E010, 811500E010, LX2502123, LX2503123
Installation: 2004-2006 Lexus RX330, 2006-2008 RX400h and 2007-2009 RX350 (factory halogen)
Professional installation and beam aiming are recommended.
- Remove the engine under-cover and partly release the front fender splash shields, then remove the bumper fasteners and pull the bumper cover forward. Disconnect the fog lamps, washer hoses or parking sensors where equipped.
- Remove the three headlight bolts, draw the assembly forward, release the headlight bracket and disconnect every rear connector.
- Fit compatible H11 low-beam, 9005 high-beam and WY21W-type signal bulbs. Reconnect the harnesses, refit the bracket and three bolts, then reinstall the bumper side supports and bumper cover. Test every function and have the beams aimed.
Frequently Asked Questions
What should I check before ordering?
Fits factory halogen models only: 2004-2006 Lexus RX330, 2006-2008 RX400h and 2007-2009 RX350. Not compatible with factory HID headlights. Bulbs are not included.
Are bulbs included?
No. This package contains the headlight assemblies only; bulbs are not included.
What access is needed to replace the assemblies?
Remove the engine under-cover and partly release the front fender splash shields, then remove the bumper fasteners and pull the bumper cover forward. Disconnect the fog lamps, washer hoses or parking sensors where equipped.