Chrome Halogen Headlights Pair with LED DRL for Nissan Maxima (2016-2018)
$204.95
Skip to product information
Chrome Halogen Headlights Pair with LED DRL for Nissan Maxima (2016-2018)
$204.95
DS-260104RF9B
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2016-2018 Nissan Maxima with factory halogen lamps and an LED daytime running light (26010-4RF9B / 26060-4RF9B), typically S, SV and SL. They will not fit SR, Platinum, or other trims with full-LED headlamps, and they will not fit 2009-2014 Maxima (2009-2014 Maxima halogen pair) or 2019-and-up lamps.
Replace faded or cracked factory halogen lamps on your 2016-2018 Maxima with this OE-style chrome-housing pair with an LED daytime running light. Each lamp has the halogen low and high beam, the LED DRL and an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your H11 low-beam and H9 high-beam bulbs, or add new ones.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2016-2018 | Nissan Maxima S, SV, SL | A36 factory halogen with LED DRL. Not SR, Platinum, or full-LED. |
Specs
- Sold as: driver and passenger pair
- Housing: chrome, clear lens, amber side marker, LED daytime running light
- Low beam: H11; high beam: H9
- Bulbs not included — reuse your bulbs
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen headlight with LED DRL (26060-4RF9B)
- Passenger-side halogen headlight with LED DRL (26010-4RF9B)
Interchange References
Replaces the original assemblies commonly crossed with 26010-4RF9B, 26060-4RF9B, NI2503235, NI2502235.
Installation: Nissan Maxima (2016-2018)
On the 2016-2018 Maxima (A36) the front bumper cover has to come off to reach the headlight bolts. Plan on a helper, trim tools and spare bumper clips. Work with a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood. Remove the fasteners across the top of the bumper and grille, the screws in each wheel well and the bolts underneath, then release each bumper corner from the fender.
- With a helper, ease the cover forward, unplug any fog light or similar connectors and set the cover on a soft surface.
- Unplug the headlight connector, remove the mounting bolts and lift the lamp out.
- Transfer your H11 and H9 bulbs if you are reusing them. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
- Refit the bumper, reconnect the battery, and test low beam, high beam, daytime running light and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Will these fit a Maxima SR or Platinum?
No. SR and Platinum used a full-LED headlamp with a different housing. These are for factory halogen lamps with an LED daytime running light, typically S, SV and SL.
Will they fit a 2009-2014 or 2019-and-up Maxima?
No. Use the 2009-2014 Maxima halogen pair for that generation. 2019-and-up lamps are a different part.
Do I need new bulbs?
No. Reuse your H11 low-beam and H9 high-beam bulbs, or add new ones. Bulbs are not included.
Do I have to cut or splice wiring?
No. The lamps plug into the factory connectors and bolt to the factory points.