Chrome Halogen Projector Headlights Pair w/ Bulbs for Ford Taurus SE SEL Limited (2010-2012)

Replace hazy or cracked headlights on your 2010-2012 Ford Taurus SE, SEL or Limited with factory halogen projector headlights with this new chrome pair. Bulbs are included.

Fitment

Will NOT fit: Taurus SHO or any car with factory HID/Xenon; 2013-2019 Taurus (see our version); Police Interceptor.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Type: Halogen projector
• Bulbs: included; match your factory bulbs (reuse them if needed)
• Housing: Chrome
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: BG1Z13008B, AG1Z13008A, AG1Z13008B. Partslink: FO2502280, FO2503280.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights
• Bulbs included (per listing)

Installation

1. Open the hood and remove the screws and clips along the top of the front bumper cover.
2. Remove the wheel-well screws on each side, release the bumper side clips and pull the cover off the fenders.
3. Unplug the headlamp, then remove the upper and front bolts (3.2 N·m / 28 lb-in), the side bolt (7 N·m / 62 lb-in) and the rivet push-pin.
4. Pull the lamp out, install the new one (bulbs included per the listing), refit the bumper cover and aim.

Steps compiled from Ford Taurus (2010-2019 platform) service manual exterior-lighting procedure; FordTaurus.net forum headlight threads. Professional installation and headlight aiming are recommended.

FAQs

Will these fit a Taurus SHO?
No. Per the listing they do not fit SHO or other HID/Xenon cars.

Will these fit a 2013 Taurus?
No. The 2013 refresh uses a different lamp; see our 2013+ version.

Do I need to remove the front bumper to replace these headlights?
Yes. The front bumper cover comes off to reach the headlamp bolts.

What bulb sizes do these use?
The listing images do not state the bulb sizes. Bulbs are included; match your factory bulb sizes if you ever replace them.

Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.