Chrome Halogen Projector Headlights Pair w/ LED DRL & Bulbs for Buick Envision (2016-2018)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace foggy headlights on your 2016-2018 Buick Envision (factory halogen, 6-pin plug) with this new chrome pair with LED DRL. HIR2 and WY21W bulbs are included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2016-2018 | Buick Envision with factory halogen headlights (6-pin plug) | Factory halogen headlights |
Will NOT fit: HID/AFS cars (see our HID version); 2019+ Envision.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam: 9012 / HIR2 (included)
- Turn: WY21W (included)
- DRL: LED
- Side marker: LED
- Connector: 6-pin
- Housing: Chrome
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 84152650, 23268083, 23281333, 23342297, 23268082, 23281332, 23342296. Partslink: GM2502442, GM2503442.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- HIR2 and WY21W bulbs (included, per listing)
Installation
- Disconnect the negative battery cable. Open the hood and remove the six T15 bolts along the top edge of the front fascia and the fascia-cover push pins.
- Turn the wheels and remove the T15 wheel-well liner bolts on each side, then the 7 mm bolts along the underside of the fascia.
- Pull the fascia corners away from the fenders, unplug the harness (passenger side) and set the fascia on a blanket.
- Remove the headlamp retaining bolts, pull the lamp forward and unplug the rear 6-pin connector.
- Install the new lamp, reconnect, test all lights before reassembly, refit the fascia and aim the headlights.
Steps compiled from Blue Ox BX1519 2016-20 Buick Envision baseplate instructions (fascia removal fasteners); GM Parts headlight assembly replacement guide. Professional installation and headlight aiming are recommended.
FAQs
Will these fit an Envision with HID?
No. These are for factory halogen cars with the 6-pin plug.
Do they fit a 2019+ Envision?
Not per this listing, which covers 2016-2018.
Do I need to remove the front bumper to replace these headlights?
Yes. The Envision front fascia comes off to reach the headlamp bolts.
What bulbs do these use?
HIR2 (9012) low/high and WY21W turn, included per the listing diagram. DRL and marker are LED.
Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.