Chrome Halogen Projector Headlights Pair w/ LED DRL & Bulbs for GMC Canyon (2015-2022)

Replace yellowed or cracked headlights on your 2015-2022 GMC Canyon with factory halogen projectors with this brand-new pair of chrome halogen projector headlights with LED DRL, bulbs included.

Fitment

Will NOT fit: Canyon with HID or full-LED lamps (Denali/AT4 2021+ unless yours matches); Chevrolet Colorado.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Chrome
• Low beam: H11
• High beam: HB3
• Turn signal: 7444NA
• DRL: LED
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 84707374, 23304232, 23414426, 23491950, 84328815, 84370581, 94776920, 84145700, 84145749, 23304233, 23414427, 23491951, 84145697, 84145748, 84328814, 84370580, 94776921. Partslink: GM2502412.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• H11, HB3 and 7444NA bulbs included

Installation

1. Disconnect the battery. Remove the T15 Torx screws along the top of the grille and the T15 fender-liner screws on both sides.
2. Fold back the fender liners and remove the three 7 mm fascia-to-fender bolts under each headlight.
3. Remove the two recessed 10 mm bolts in the lower grille (long extension) and the T15/10 mm bolts under the bumper, unplug the fogs and pull the fascia forward.
4. Remove the four 7 mm headlamp bolts (two on top, one at the side, one under the turn signal) and unplug the single harness.
5. Install the new lamp, refit the fascia and every fastener, and aim the headlights.

Steps compiled from ColoradoFans "Detailed Colorado Bumper Removal" and "2018 Colorado headlight change out" threads, 355nation fascia how-to. Professional installation and headlight aiming are recommended.

FAQs

What bulb sizes do these headlights use?
Per the listing: H11 low beam, HB3 high beam and 7444NA turn signal, all included; running lights are LED.

Will these fit a Canyon Denali or AT4?
Only if your truck has the halogen projector lamp with LED DRL. Trucks with HID or full-LED headlights need a different lamp.

Do I need to remove the front bumper to replace these headlights?
Yes. On the 2015-2022 Colorado/Canyon the front fascia comes off (T15 grille and liner screws, three 7 mm bolts per side, two recessed 10 mm lower-grille bolts) before the four 7 mm headlamp bolts can be reached.

Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.