Chrome HID Headlights Pair w/ AFS for Lexus GS300 / GS350 (2006-2011)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Restore clear lights on your 2006-2011 Lexus GS300 or GS350 with this new chrome HID pair for cars with factory HID and AFS. Reuse your stock D4S low beam and 9005 high beam bulbs.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2006-2011 | Lexus GS300 / GS350 with factory HID and AFS | Factory HID headlights with AFS |
Will NOT fit: Halogen or non-AFS cars; 2012+ GS.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low beam: D4S HID (reuse stock, per listing)
- High beam: 9005 (reuse stock, per listing)
- AFS: Yes
- Housing: Chrome
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 8114030B60. Partslink: 8114030B60, 8114030B51.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- HID bulbs and ballasts are NOT included; reuse your factory ones
Installation
- Disconnect the negative battery cable and wait at least 90 seconds (airbag system). Remove the seven clips and the cool-air intake duct seal.
- Put protective tape under the fenders, remove the two clips, six screws and five bolts, then pull the bumper cover to release the three claws on each side; unplug the sonar sensors if equipped.
- Remove the three clips and the engine-room side cover.
- Unplug the headlight connector, remove the three headlight bolts, disconnect the headlight-washer hose if equipped, release the claw and pull the lamp out.
- Move your factory HID bulb and light control ECU over if required, install in reverse and aim the headlights.
Steps compiled from Lexus GS (S190 2005-2011) service manual "Headlight Assembly Removal" (jdmfsm.info); ClubLexus GS 3rd-gen "DIY: How to take apart headlights" thread. Professional installation and headlight aiming are recommended.
FAQs
Will these fit a car without AFS?
No. Factory HID/AFS cars only, per the listing.
Does it fit the 2012+ GS?
No. 2006-2011 only.
Do I need to remove the front bumper to replace these headlights?
Yes. The front bumper cover comes off to reach the headlamp bolts.
Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.