Chrome HID Headlights Pair w/ Blue Ring for Buick Regal (2012-2013)

Replace foggy headlights on your 2012-2013 Buick Regal with this new chrome HID pair with blue ring. Reuse your D1S bulbs.

Fitment

Will NOT fit: Halogen cars; 2011 white-ring lamps.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low beam: D1S HID (not included, per listing photo)
• Turn: PY21W (per listing photo)
• Housing: Chrome
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 22934024, 20990313, 20990314. Partslink: GM2503372, GM2502372.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights
• HID bulbs and ballasts are NOT included; reuse your factory ones

Installation

1. Disconnect the negative battery cable (HID high voltage). Open the hood and remove the upper bumper screws.
2. Turn the wheels, remove the wheel-well/fender screws and the underside clips.
3. Pull the bumper forward (fully or on one side) and unplug the parking/temperature sensor connectors as needed.
4. Unplug the headlamp, remove its retaining bolts and pull the lamp out.
5. Move your D1S bulbs over, install in reverse and aim the headlights.

Steps compiled from remont-bampera.com Buick Regal V 2008-2017 bumper removal; Buick Owners Group "Headlight removal" thread; Go-Parts 2011-2013 Regal headlight guide. Professional installation and headlight aiming are recommended.

FAQs

Will these fit a 2011 Regal?
No. See our 2011 version.

Are bulbs included?
No. Reuse your D1S bulbs.

Do I need to remove the front bumper to replace these headlights?
Yes. The front bumper cover comes off to reach the headlamp bolts.

Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.