Chrome HID Headlights Pair w/ LED DRL, Bulbs & Ballasts for Ford Escape (2017-2019)

Replace hazy headlights on your 2017-2019 Ford Escape with factory HID with this new chrome pair. D3S bulbs and ballasts are included.

Fitment

Will NOT fit: Halogen-headlight models; 2013-2016 Escape.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low beam: D3S HID (included, per listing photo)
• DRL: LED
• Housing: Chrome
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: GJ5Z13008Q, GJ5Z-13008-G, GJ5Z-13008-H. Partslink: FO2519135, FO2518135.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights
• HID bulbs and ballasts included (per listing)

Installation

1. Open the hood, remove the radiator cover clips and the 10 mm bolts and 7 mm screws beneath it.
2. Turn each wheel fully, remove the fender-liner screws at the front of the liner and pull it aside.
3. Remove the bumper-to-fender bolts, release the bumper clips, unplug the fog-light connectors and pull the bumper cover forward.
4. Remove the headlamp upper and lower 10 mm fasteners, unplug it, install the new lamp, test and aim.

Steps compiled from FordEscape4 front bumper cover removal procedure, Remont-bampera Escape 2012-2019 guide. Professional installation and headlight aiming are recommended.

FAQs

What bulb does it use?
D3S, per the listing photo. Bulbs and ballasts are included.

Will these fit a halogen Escape?
No. Factory HID models only.

Do I need to remove the front bumper to replace these headlights?
Yes. On the 2017-2019 Escape the front bumper cover has to be pulled to reach the lower headlamp fasteners.

Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.